Epoxy curing agent Knowledge 2,3-butanedione

2,3-butanedione

广告位

2,3-butanedione structural formula

Structural formula

Business number 04SX
Molecular formula C4H6O2
Molecular weight 86.09
label

diacetyl,

diacetyl,

diacetyl,

Diacetyl,

Butanedione,

Biacetyl,

Dimethyl diketone,

food spices

Numbering system

CAS number:431-03-8

MDL number:MFCD00008756

EINECS number:207-069-8

RTECS number:EK2625000

BRN number:605398

PubChem number:24846980

Physical property data

1. Properties: light yellow-green oily liquid. It has the smell of benzoquinone, and the extremely dilute aqueous solution has a special butter oil aroma. The vapor has a chlorine-like smell.

2. Relative density (g/mL, 18.5/4℃): 0.9808

3. Relative density (20℃, 4℃): 0.980818.5

4. Melting point (ºC): -1.2

5. Boiling point (ºC, normal pressure): 88~89

6. Refractive index at room temperature (n20D): 1.3951

7. Refractive index (18ºC): 1.3933

8. Flash point (ºC): 7

9. Specific rotation (º): Undetermined

10. Gas phase standard heat of combustion (enthalpy) (kJ·mol -1): -2104.4

11. The gas phase standard claims heat (enthalpy) (kJ·mol-1): -327.1

12. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -2065.7

13. Liquid phase standard claimed heat (enthalpy) (kJ·mol-1): -365.8

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. The logarithmic value of the oil-water (octanol/water) partition coefficient: Undetermined

17. The upper limit of explosion (%, V/V): Undetermined

18. Explosion Lower limit (%, V/V): Undetermined

19. Solubility: Miscible with ethanol and ether, soluble in about 4 parts of water.

Toxicological data

1. Acute toxicity: Oral – Rat LD50: 1580 mg/kg; Oral – Mouse LD50: 250 mg/kg.

2. Irritation data: Skin – Rabbit 500 mg/24 hours Moderate.

3. Highly flammable and its vapor is harmful if inhaled. Irritating to eyes, respiratory system and skin.

Ecological data

��Substances may be harmful to the environment and special attention should be paid to water bodies.

Molecular structure data

1. Molar refractive index: 20.63

2. Molar volume (cm3/mol): 88.8

3. Isotonic specific volume (90.2K ): 201.4

4. Surface tension (dyne/cm): 26.4

5. Polarizability (10-24cm3):8.18

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: 3

6. Topological molecule polar surface area 34.1

7. Number of heavy atoms: 6

8. Surface charge: 0

9. Complexity: 71.5

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Natural products are found in laurel oil, celery seed oil, angelica root oil, raspberries, strawberries, cream, wine, etc. Because it is volatile, it only exists in the initial distillate of essential oils and distilled water. It has high vapor pressure and can evaporate quickly at room temperature. Miscible in ethanol, ether, most non-volatile oils and propylene glycol, soluble in glycerin and water, insoluble in mineral oil. Protective clothing should be worn when using.
2. Exist in flue-cured tobacco leaves, oriental tobacco leaves, and smoke.

3. Naturally found in the essential oils of Finnish pine, angelica and lavender, as well as Reunion geranium oil, Guava citronella oil and Laibai should be in the oil.

4. It is mostly generated when plant raw materials undergo water vapor.

Storage method

This product should be sealed and stored in a cool place. Storage temperature 4ºC

Synthesis method

1. In nature, diacetyl is widely found in essential oils of various plants, such as iris oil, angelica oil, laurel oil, etc. It is the main component of the fragrance of butter and other natural products. Industrial production of diacetyl is to treat methyl ethyl ketone with nitrous acid to generate butanone oxime, which is then decomposed with dilute sulfuric acid. Or use vinyl acetylene or methyl vinyl ketone to hydrate and then oxidize. In the laboratory, it can be prepared by oxidizing butanone with selenium dioxide, or by reacting diketoxime with sodium nitrite.

2. It can be obtained from high-content essential oils by the free method: add 1 part of essential oil to 2 parts of phosphoric acid to form a crystalline adduct C4H6O2·2H3PO4, and diacetyl will be released after adding water, such as If phosphoric acid is added in excess, the adduct will be liquid.
Obtained from glucose through special fermentation.
Synthesized using methyl ethyl ketone as starting material.
It is obtained by oxidizing butanone with sodium nitrite in the presence of hydrochloric acid, hydrolyzing it with sulfuric acid and then distilling it.

3. Tobacco: OR, 18; FC, 40.

4. Preparation method:

In a reaction bottle equipped with a stirrer, thermometer, reflux condenser, and dropping funnel (the lower end extends below the liquid level), add 2- Add 40g (0.56mol) of butanone (2), 52mL of concentrated hydrochloric acid, and dropwise add a solution of 40g (0.58mol) of sodium nitrite dissolved in 136mL of water at 50 to 60°C with vigorous stirring, and finish the addition in about 2 hours. Watch for nitric oxide escaping. After the addition is completed, transfer the reactants to a 5L reaction bottle, add a solution of 141g sodium nitrite dissolved in 240mL water, install air condensation, add dropwise a solution of 120mL concentrated sulfuric acid and 340mL water from the top of the condenser, and finish the addition in 10 minutes. . Leave the mixture for 2 days until the nitrite disappears (can be tested with potassium iodide-starch test paper). Add 200g of sodium sulfate and distill. Stop distillation when the distillate sample remains turbid after being mixed with 20% sodium hydroxide solution. The distilled liquid was dried with anhydrous sodium sulfate, re-distilled, and the fraction at 86-88°C was collected. The crude product thus obtained was dried over anhydrous sodium sulfate, distilled, and the fraction at 86-88°C was collected to obtain 16-18 g of 2,3-butanedione (1), with a yield of 33.3%-37.5%. [1]

Purpose

1. It is mainly used to prepare food flavors. It is the main spice of cream flavor. It can also be used in milk, cheese and other flavors. Such as berries, caramel, chocolate, coffee, cherries, vanilla beans, honey, cocoa, fruity aroma, wine aroma, tobacco aroma, rum, nuts, almonds, ginger, etc. It can also be used in trace amounts in fresh fruity fragrances for cosmetics or new flavors. Used as solvent and organic synthesis intermediate.

2. It can also be used as a hardener for gelatin. It is an important reagent for identifying nickel.

Resource:allhdi.com

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/118833

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search