Epoxy curing agent News Environmentally friendly production process of tetramethylguanidine

Environmentally friendly production process of tetramethylguanidine

广告位

Environmentally friendly production process of tetramethylguanidine

Environmentally friendly production process of tetramethylguanidine

Tetramethylguanidine (TMG for short) is an important organic compound that has attracted much attention due to its wide range of applications in chemical industry, pharmaceutical manufacturing, materials science and other fields. However, traditional tetramethylguanidine production methods are often accompanied by problems of environmental pollution and resource waste. In response to the global call for sustainable development and green chemistry, it is particularly important to develop an environmentally friendly tetramethylguanidine production process.

Key elements of environmentally friendly production processes

The environmentally friendly tetramethylguanidine production process should include the following key elements:

  1. Raw material selection: Prioritize the use of renewable or environmentally friendly raw materials to reduce dependence on fossil fuels.
  2. Optimization of reaction conditions: By precisely controlling reaction temperature, pressure and catalyst selection, the reaction efficiency is improved and the production of by-products and wastes is reduced.
  3. Solvent recycling: Use low-toxic, easily recyclable solvents and establish a solvent circulation system to reduce solvent consumption and environmental pollution.
  4. Waste treatment: Effectively treat waste water, waste gas and solid waste generated during the production process to ensure that emission standards are met.
  5. Energy Saving: Optimize the production process, reduce unnecessary energy consumption, and improve energy utilization efficiency.

Implementation of environmentally friendly production processes

Selection of raw materials and reaction paths

In terms of raw material selection, environmentally friendly production processes tend to use dimethylamine and sodium cyanide as starting materials instead of traditional cyanogen chloride, because the latter may produce toxic by-products during the preparation process. Dimethylamine and sodium cyanide react under mild conditions, which can effectively reduce the emission of harmful gases.

Catalyst and reaction conditions

The use of efficient catalysts, such as metal complexes or biological enzymes, can promote reactions at lower temperatures and pressures, reduce energy consumption and increase yields. In addition, precise control of reaction conditions, such as pH value and reaction time, is also key to reducing by-products.

Solvent and separation technology

Choose green solvents, such as water or supercritical carbon dioxide, to significantly reduce your environmental impact. At the same time, the use of advanced separation technologies, such as membrane separation, supercritical fluid extraction or continuous distillation, can effectively recover solvents and reduce waste generation.

Waste Management

For unavoidable waste, advanced treatment technologies such as biodegradation, catalytic oxidation or electrochemical treatment are used to convert them into harmless substances or valuable by-products.

Case analysis: improved production process

Based on the above principles, a typical environmentally friendly tetramethylguanidine production process may include:

  1. Raw material pretreatment: Dimethylamine and sodium cyanide are premixed and evenly dispersed to reduce unevenness in subsequent reactions.
  2. Catalytic reaction under mild conditions: Under controlled pH and temperature conditions, use an efficient catalyst to promote the reaction of dimethylamine and sodium cyanide to generate the target product tetramethylguanidine hydrochloride .
  3. Solvent recovery and product extraction: Using supercritical fluid extraction technology, tetramethylguanidine is extracted from the reaction mixture and the solvent is recovered for recycling.
  4. By-product treatment: Use biodegradation or catalytic oxidation technology to treat by-products generated during the reaction to reduce environmental pollution.
  5. Final product purification: Obtain high-purity tetramethylguanidine products through continuous distillation or other advanced separation techniques.

Conclusion

The environmentally friendly tetramethylguanidine production process can not only significantly reduce the negative impact on the environment, but also improve production efficiency and economic benefits. With the popularization of the concept of green chemistry and the continuous advancement of technology, future tetramethylguanidine production will pay more attention to the rational utilization of resources and environmental sustainability, and contribute to the construction of a green chemical industry.

Future Outlook

Future research directions will focus on developing more efficient and safer catalysts, exploring the utilization of renewable raw materials, and optimizing the energy efficiency of the entire production process. Through interdisciplinary cooperation and technological innovation, the production of tetramethylguanidine will gradually move towards a more environmentally friendly and sustainable path.
Further reading:

N-Ethylcyclohexylamine – Manufacturer of N,N-Dicyclohexylmethylamine and N,N-Dimethylcyclohexylamine – Shanghai Ohans Co., LTD

CAS 2273-43-0/monobutyltin oxide/Butyltin oxide – Manufacturer of N,N-Dicyclohexylmethylamine and N,N-Dimethylcyclohexylamine – Shanghai Ohans Co., LTD

T120 1185-81-5 di(dodecylthio) dibutyltin – Amine Catalysts (newtopchem.com)

DABCO 1027/foaming retarder – Amine Catalysts (newtopchem.com)

DBU – Amine Catalysts (newtopchem.com)

bismuth neodecanoate – morpholine

DMCHA – morpholine

amine catalyst Dabco 8154 – BDMAEE

2-ethylhexanoic-acid-potassium-CAS-3164-85-0-Dabco-K-15.pdf (bdmaee.net)

Dabco BL-11 catalyst CAS3033-62- 3 Evonik Germany – BDMAEE

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/165881

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search