What is the same number of lubricants
Pump lubricating agent, also known as pipe lubricating agent, is the abbreviation of concrete pump lubricating agent. The main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump. In the past, water and mortar have been used to lubricate concrete pumps, which is neither economical nor in line with the concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of lubricant for pump trucks has played a positive role in reducing pump lubricating costs, saving money, and developing low-carbon environmental protection, energy conservation and emission reduction in the concrete industry.
Product performance of lubricant
Concrete lubricating agent is a polymer material. Its appearance is a light yellow (slightly reddish) fine powdery substance, which is easily soluble in water. The pH value of its aqueous solution is neutral and has no effect on the setting time and strength of concrete. It does not cause corrosion to steel bars and is completely sufficient. Used to replace traditional pipe mortar. The pH value of the solution of non-standard products is alkaline or strongly alkaline, so it should be selected with caution.
Application scope of lubricating agent
Lubricating agent products are suitable for lubricating on-site pump pipes for pumping concrete and various dry mortars. Pump work. The PH value of its qualified products is neutral and has good adaptability to various grades of concrete. It can completely replace the pump mortar of various pump pipes. Pump lubricant can avoid clogging accidents of concrete pumps and on-site mortar pumps, reduce transportation vehicles, increase equipment utilization, shorten operation time, and reduce the use costs of enterprises using ready-mixed concrete and ready-mixed dry mortar. Using pump truck lubricant products can achieve the purpose of saving time, effort, money, energy conservation and environmental protection.
How to use pump lubricant
Before concrete pumping construction, first take the required amount of clean dissolved water and pour it into the container , then slowly add the pump lubricant, stirring while adding until all is dissolved, then let it sit for 3-5 minutes, stir again and then use. When using a truck pump to pump concrete, slowly pour the prepared Pump Runtong solution into the hopper along the inner wall of the pump truck hopper, and then start to slowly pour concrete into the hopper. After the concrete covers the feed port of the delivery pump, you can Start pumping concrete and ready-mixed mortar under pressure. The method is the same when using ground pumps and mortar pumping equipment.
Pump truck lubricant dosage preparation table
Transmission pump tube length product dosage dissolved water dosage
1 bag 35±2kg below 60 meters
60m-100m 2 bags 70±5kg
100-200 meters 3-4 bags 150±10 kg</p
微信扫一扫打赏
