High-efficiency pump truck lubricant can quickly dissolve in water, is colorless and odorless and has no pollution to the environment. The use of this product can replace the traditional process of using cement mortar to lubricate the delivery pipelines of concrete pump trucks. This product has no corrosion to the steel bars in the concrete structure, delivery equipment, and delivery pipelines. It is a change in the traditional concrete delivery construction process and is an important step in the current construction industry. A new type of building material.
How to use high-efficiency pump truck lubricant
Pour this product into the corresponding volume of water and stir for 30 seconds to fully dissolve. When the solution becomes thick and lubricated, it can be used. According to the type of concrete delivery equipment and the length of the delivery pump pipe, refer to the following table to prepare the solution.
1. When using a truck pump to pump concrete, pour the prepared lubricant solution into the hopper (if there is serious water leakage at the bottom of the hopper, use a small amount of yellow Use sand or concrete to level the groove at the bottom of the hopper), first turn on the positive pump to pressurize the pump, so that the lubricant solution enters the delivery pipe in front of the concrete, then slowly discharge the concrete into the hopper along the inner wall of the hopper, and continue pumping until the concrete discharge.
2. When using the ground pump, first check that there is no leakage at the pump pipe connection. To prevent residues from remaining in the pump pipe, pump water and clean it first. Pipe, wait until the water pump in the hopper and pipe is at its minimum, and then pump according to the above steps</p
微信扫一扫打赏
