Can concrete moisturizer be poured directly into concrete?

Concrete pump truck lubricating agent is a new lubricating material developed for concrete pumping equipment. It is characterized by simple operation and good lubricating effect. It can completely replace the original cement mortar lubricating method. More importantly, it is suitable for business operations. Concrete manufacturers and construction units save construction costs. During the actual construction process, many construction units asked us whether the lubricant solution for lubricating pipes can be poured directly into the structure. In response to your doubts, I will give you detailed instructions on how to handle this. Make things clear.

If it is a pump truck lubricant produced by a regular manufacturer, it will have no effect on the strength of concrete. Its pH value is between 7.2 and 7.8, which is neutral. However, there are some small workshops on the market that, because the production process does not meet the standards of regular manufacturers, are shoddy and use inferior materials to produce. The pH value far exceeds the normal range. In mild cases, it will corrode pumping equipment, and in severe cases, it will affect the pumping equipment. The strength of concrete affects the quality of the project. Choosing a pump truck lubricant produced by a regular manufacturer is a prerequisite for ensuring the quality of the project.

There are strict requirements for concrete slump. If the lubricating agent is poured directly into the structure during the construction process, it is equivalent to artificially increasing the amount of water in qualified concrete. It will increase the slump of concrete, increase the segregation of concrete, and reduce the strength of concrete. In order to ensure the quality of the project during construction, Yulong Materials recommends that all construction units strictly follow the instructions for using the Yulong pump truck lubricant. In actual construction, the lubricant solution must be discharged outside the formwork and observed with the naked eye. When the concrete at the outlet becomes the same color as the inlet, it can be poured directly. If it is a lubricating agent produced by a regular manufacturer, if a small amount of lubricating solution is mixed into the concrete, it will not affect the strength of the concrete, but it will prolong the solidification time of the concrete. If it is a lubricating agent produced by a small workshop, be sure not to mix the lubricating agent solution into the concrete, because the PH value seriously exceeds the normal range, seriously affecting the moldability of the concrete. Some inferior tubing moisturizers on the market are generally cheaper than tubing moisturizers produced by regular manufacturers, their packaging is rough, and some even have no manufacturer. In order to ensure the quality of the project, we encourage everyone to use lubricants produced by regular manufacturers. </p