Tips on using foam caulking gun type and tube type

In the adhesive market, PolyurethaneFoam Caulkis not single variety. It includesGun styleandtube style, different types and different methods. No matter which one the user wants to chooseFoam caulk, you must learn to use it correctly to avoid problems. Then, The author is here to teach youHow to use guns and pipes correctly-style foam caulk and what are the tips.

1. How to use the gun style correctlyFoam caulk?

①Take out the foaming gun and clean it with detergent to make sure that the foaming gun is not blocked. .

②ReadyFoam caulk, grab the middle of the can and shake it hard15 to 30 times. When the internal materials are mixed evenly, the performance will not be affected.

③willFoam caulk and install it on the foaming gun.

④Hold the handle of the foaming gun and load the material can into it. If you want to adjust the flow rate, you can open the back of the foam gun.

⑤After making preparations, you can Pull the trigger to fill the exact part that needs to be filled. You can try it out in advance and adjust the flow rate at any time.

⑥When a can After the material is used up, it can be removed and replaced with new products. After the construction is completed, remove the material tank and clean the foaming gun with cleaning agent to avoid residue.

2. How to use tube style Foam caulk?

Take out the materials and follow the clockwise direction Installed.

When the material tank is at the top, the foaming gun is at the bottom for convenience is the correct way. Once you are ready, you can inject glue.

When spraying, pour in the bottom-up direction . Don’t pour too much at one time, just occupy 80% of the filling volume.