Epoxy curing agent Knowledge Test method for oil leakage of foam caulking agent

Test method for oil leakage of foam caulking agent

广告位

Curedfoam caulk Oil leakage can easily lead to poor adhesion, and is toxic and harmful to the human body. The launch of this test method solves the problem of the lack of identification methods for oil leakage of foam caulking agents and fills a gap in the industry.

1. Scope of application

This test method describes how to test one-component foam caulking agent (OCF) for oil leakage after the foam has cured.

2. Brief description of steps

Pop the liquid foam to On the PE film, after curing for 24 hours, cut out the foam of a fixed size and transfer it to A4 paper. Put a 1kg weight on the foam and place it in a 50°C oven for 24 hours to observe the oil permeability.

Three. Background and purpose

The purpose is to determine whether the cured product has oil leakage.

Four. Device

Controllable constant temperature and humidity laboratory;

Adjustable temperature oven;

PE plastic film;

1kg weight;

A4 paper sheets: 70g/m2.

Two boards (wooden boards or other lightweight boards): About 100g, size recommendation: length and width 100*200mm

Utility Knife

Five. Test steps

1. Preparation

Place the sample jar to be tested in the test environment (23℃, 50% relative humidity) for at least 24 hours.

2. Steps

Shake the one-component foam caulking (OCF) can 60 times;

Install the nozzle or spray gun;

Discard the front 30-50g foam;

at Put 5-6 uniform foam strips on the PE film without leaving any gaps, each with a length greater than 20cm and a diameter of 3-4cm;

Cure After 24 hours, cut into foam blocks with a length and width of 200*100mm (Figure 1).

Place one or several A4 papers neatly on On one of the boards, place the cut foam block on it, and press an A4 paper, a board and a 1kg weight on the foam block in sequence (Figure 2).

and then placed in 50℃ oven.

After 24 hours, observe whether there are any oil stains on the A4 paper below or above.

6. Judgment criteria

If you observe that there are oil stains on both the upper and lower sides, it is judged that the product does not leak oil.

Title of this article: Test method for oil permeability of foam caulking agent

Source of this article: http://www.wellgo.com. cn/newb/information_2490.shtml

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/25554

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search