Epoxy curing agent Knowledge The development background and process flow of glue-injected broken bridge aluminum profiles

The development background and process flow of glue-injected broken bridge aluminum profiles

广告位

Development background:

“Broken Bridge Aluminum Profile”The word “bridge”,refers to the material science sense font>Cold and hot bridge, and“broken ”character representationisAction, that is, interrupting the hot and cold bridge, specificallyIn terms of because aluminum profiles are ActiveMetalMixture, It is easy to conduct heat, so when Winter and summerIndoor and outdoorThe temperature difference is relatively large, the aluminum profile is Willbecome a heat transfer tower“Bridge”, like thisaluminumMade into doors and windowsEasy to conduct heat, its thermal insulation performance is notgood font>‘s. The broken bridge aluminum breaks the aluminum profile from the middle, and it uses thermal conductivityThe rate is very low‘sAluminum profile thermal insulationglue Connect the disconnected aluminum profiles into one, so that the heatwill be blocked, aluminum profile material The thermal insulation performance also becomes better, preventing the spread of heat. Achieving warmth in winter and coolness in summer.

Process flow:

In modern broken bridge aluminum profile production Craft中,有Wear stripsandThere are two production methods of glue injection, glue-injection broken bridge aluminum profile Processing methodis carried out through the following steps: 1, fix the aluminum profile to be processed on the workbench; 2, span>Insulating glueSlowly inject the glue from the glue injection port of the aluminum profile to the other end through the glue injection equipmentGlue, Push the gluewater Extrude toward the opening at the other end;3, wait until the other end of the aluminum profile is filledfull glueWater, the glue injection equipment stops injecting glue; 4, waitThermal insulation glue After curing, use a cutting wheel to cut off the upper and lower surfaces of the glue injection part of the aluminum profile to form a broken bridge to obtain a broken bridge aluminum profile.

AboutGlue-injected broken bridge aluminum I will introduce you to the development background and process flow of profiles , if you want to know more information, please pay attention to Shanghai Weigu.

Title of this article: Development background and process flow of glue-injected broken bridge aluminum profiles

This article Source: http://www.wellgo.com.cn/newb/information_2324.shtml

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/26605

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search