Inorganic thickening powder formula

1. Product introduction:

Inorganic thickening powder is developed with great concentration by the scientific researchers of Anhui Yulong New Material Technology Co., Ltd., repeated experiments and used as a new engineering mortar additive. It is made from a variety of inorganic and organic materials through scientific preparation, steaming, grinding, winnowing, pH adjustment and other processes. It has various technical properties such as reinforcement, thickening, water retention, anti-crack, anti-seepage, anti-freeze, strong adhesion, anti-cavitation and wear resistance; its inclusion can increase the amount of fly ash replacing cement in the mortar cementitious material. About 60% (can save 5 to 20 yuan per cubic meter of mortar), which significantly improves the early strength and significantly reduces the later shrinkage value; it can improve various physical and mechanical properties and durability of the mortar, and can improve work efficiency and reduce construction costs. , purify the environment, save energy, etc., and have significant social and economic benefits; it has unique cohesiveness, crack resistance and excellent construction operability.

Proportion based on one ton production volume:

Raw materials Specifications Dosage

Polyvinyl alcohol 20-99 24-99 type) 6.5kg

Acrylamide produced in Nanchang, Jiangxi 8kg

Ammonia reagent type 83g

Additive produced in Xinyang 1kg

Ammonium persulfate reagent type 20g

Sodium bisulfite reagent type 15g

Polyacrylamide molecular weight above 10 million 300g

Production process

1. Polyvinyl alcohol production method: first add 160kg of water Add it to the reaction tank. When the temperature reaches 60°C, add 6.5kg of polyvinyl alcohol and start the mixer. When the temperature continues to rise to 95°C, stop heating and keep stirring for 60 minutes. Stop and set aside.

2. Production method of acrylamide: first add 100kg of water into the reaction tank and heat it to 40℃, start the mixer, add 8kg of acrylamide, continue to stir, add 1kg of enhancer, continue to stir and heat to 71 At -72°C, stop heating, add 83g of ammonia, continue stirring for 1-2 minutes, add 20g of amine persulfate, stir for one minute, add 15g of sodium bisulfite, continue stirring for 1-2 minutes, then stop, reaction 45 -After 65 minutes, you can see it is very thick. (It is best to use plastic tanks or stainless steel tanks)

3. Polyacrylamide production method: first add 60-70kg of water into a large plastic bucket, add 300g of polyacrylamide while stirring, and after all is dissolved Stop stirring when there are no more particles. </p