Epoxy curing agent Knowledge JH-VIII retarding water reducing agent

JH-VIII retarding water reducing agent

广告位

JH-VIII retarding water reducing agent

1. Product Introduction

This product is made of retarding, plastic-preserving, foam-reducing and water-reducing components. Under high temperature conditions in summer, it can delay the setting time of concrete and make new Mixed concrete maintains its plasticity for a longer period of time to facilitate pouring and molding. When applied to fluid concrete, it can increase the cohesion of concrete, reduce slump loss and segregated bleeding. In the continuous pouring of large volumes of concrete, it can reduce the heat of hydration, delay the peak of hydration heat release, and reduce temperature cracks. The production of admixture is an indispensable type of admixture in summer concrete construction.

2. Homogeneity index

project

Indicators

Project

Indicators

Appearance

pink

Grey-yellow powder

Plurry fluidity

130mm

liquid

Brown liquid

Fineness

0.315mm sieve residue<5%

Powder moisture content

5±1%

Chloride ion content

Not detected

Liquid specific gravity

1.18

Ph value

6-7

3. Comparison of main technical performance indicators: C×1.0% ="HEIGHT: 10px" class="firstRow">

Detection items

Standard indicators

Detection results

First Class

Qualified product

Water reduction rate, % , not less than (≥)

8

5

12

Bleeding rate, %, not greater than (≤)

100

30

Air content, %, not greater than (≤)

5.5

3.0

Condensation time difference, min is greater than, (>)

Initial setting

+90

+183

Compressive strength ratio, % , not less than (≥)

3d

100

100

7d

110

110

Bleeding rate, %, not greater than (≤)

100

30

Air content, %, not Greater than (≤)

5.5

3.0

Condensation time difference, min is greater than, (>)

Initial setting

+90

+183

Compressive strength ratio, %, not less than (≥)

3d

100

100

7d

110

110

28d

110

105

115

Shrink ratio, %, not greater than (≤)

28d

135

120

Corrosion effect on steel bars

It should be stated that there is no corrosion hazard to steel bars

No rust

parent; PADDING-LEFT: 7px; PADDING-RIGHT: 7px; BORDER-TOP: #f0f0f0; BORDER-RIGHT: windowtext 1px solid; PADDING-TOP: 0px" valign="top" width="69">

28d

110

105

115

Shrink ratio, %, not greater than (≤)

28d

135

120

Corrosion effect on steel bars

It should be stated that there is no corrosion hazard to steel bars

No rust

</table
广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/28499

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search