Epoxy curing agent Knowledge Covestro Desmodur N3790 BA HDI polyisocyanate curing agent light-resistant and quick-drying

Covestro Desmodur N3790 BA HDI polyisocyanate curing agent light-resistant and quick-drying

广告位

Covestro Desmodur N3790 BA HDI polyisocyanate curing agent light-resistant and quick-drying

<p style="margin-left:0.0000pt; margin-right:0.0000pt"

Type

Aliphatic polyisocyanate(High functional group hexamethylene diisocyanate trimer)

Supply form

about90% butyl acetate solution

Purpose

Used as a light-resistant, fast-drying polyurethane coating curing agent component

Specifications

Features

Value

Measurement units

Method

NCOContent

17.8±0.5

%

DIN EN ISO 11909Method

Viscosity,23°C

Approx. 1600

mPa ·s

DIN EN ISO 3219/A.3

Equivalent

Approx. 236

Flashpoint

Approx. 42

°C

DIN 53213/1

Density@20°C

approx. 1.13

g/ml

DIN EN ISO 2811

*This data is general information , is not part of the product manual.

Solubility/Dilution
Desmodur ® 3790BA can be used with esters, ketones, and aromatic hydrocarbon solvents such as: ethyl acetate, butyl acetate, methoxypropyl acetate, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, 100 No. naphtha solvents and their mixtures for dilution. Generally have good miscibility with these solvents.
But The resulting solution must be tested for storage stability. Polyurethane grade solvents should be used (less than 0.05% water content, no hydroxyl or amino reactive groups). Aliphatic hydrocarbons are not suitable as solvents. Desmodur® N3790 should not be diluted below 40% solids. Solutions with low base content may develop turbidity and sedimentation after long-term storage.

Compatibility
Desmodur ® N3790 can generally be used with the following products. Namely: Desmodur® N100, N75, N3200, N3400, N3600 and Desmodur® Z4470 aliphatic polyisocyanates; Desmodur® L, HL and IL aromatic polyisocyanates; Desmophen® 670 polyester polyols; Desmophen® A polyisocyanates Acrylate. However, the compatibility of the prepared solution must be tested. Desmodur® N3790 is incompatible with branched polyester polyols such as Desmophen® 651 or polyether polyols such as Desmophen® 1380BT.

Features/Applications
Desmodur ® N3790 is mainly used as the curing agent component of light-resistant two-component polyurethane coatings. This coating has excellent chemical resistance and weather resistance, outstanding gloss retention and excellent mechanical properties. The ideal coreactants are polyacrylates or polyester polyols. Coating systems formulated with Desmodur® N3790 are suitable for self-drying or baking and are used for finishing automotive original equipment (OEM), automotive refinishing, transportation vehicles, industrial products and plastics.

Save
Desmodur ® N3790 is sensitive to moisture and therefore should be stored in the original sealed container. When properly stored at room temperature, this product has a shelf life of at least 6 months.

�.
But The resulting solution must be tested for storage stability. Polyurethane grade solvents should be used (less than 0.05% water content, no hydroxyl or amino reactive groups). Aliphatic hydrocarbons are not suitable as solvents. Desmodur® N3790 should not be diluted below 40% solids. Solutions with low base content may develop turbidity and sedimentation after long-term storage.

Compatibility
Desmodur ® N3790 can generally be used with the following products. Namely: Desmodur® N100, N75, N3200, N3400, N3600 and Desmodur® Z4470 aliphatic polyisocyanates; Desmodur® L, HL and IL aromatic polyisocyanates; Desmophen® 670 polyester polyols; Desmophen® A polyisocyanates Acrylate. However, the compatibility of the prepared solution must be tested. Desmodur® N3790 is incompatible with branched polyester polyols such as Desmophen® 651 or polyether polyols such as Desmophen® 1380BT.

Features/Applications
Desmodur ® N3790 is mainly used as the curing agent component of light-resistant two-component polyurethane coatings. This coating has excellent chemical resistance and weather resistance, outstanding gloss retention and excellent mechanical properties. The ideal coreactants are polyacrylates or polyester polyols. Coating systems formulated with Desmodur® N3790 are suitable for self-drying or baking and are used for finishing automotive original equipment (OEM), automotive refinishing, transportation vehicles, industrial products and plastics.

Save
Desmodur ® N3790 is sensitive to moisture and therefore should be stored in the original sealed container. When properly stored at room temperature, this product has a shelf life of at least 6 months.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/68429

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search