Evonik TEGO Dispers 750W pigment wetting and dispersing additive

Products Description

TEGO Dispers 750W pigment wetting and dispersing additive. Wetting and stabilizing all pigments, it has good compatibility when used in color pastes and hardly affects stability.

Utility

Project	Typical data
Viscosity decreases, organic pigments/carbon black	4
Color intensity/gloss, organic pigment/carbon black	5
Viscosity decreases, inorganic pigments/fillers	4
Color intensity/gloss, inorganic pigments/fillers	5

0=Not applicable 5=Highly applicable

Suitable Sex

Project

Typical data

Water-based

Suitable

Solvent-based

Not applicable

Two-liquid type 100%

Not applicable

Radiation Curing

Recommended addition amount for co-grinding: 0.5-2.0%

Use Description

Add grinding before dispersion

This product should not be used as the only wetting and dispersing agent when grinding carbon black pigments Additives

Resistance testing should be conducted before using uncoated stainless steel for storage and transportation products

Recipe Suggestions

1. Very good viscosity reducing substitute: TEGO® Dispers 755 W

2. In order to achieve the best blackness of lamp black, use TEGO® Dispers 750 W is effective with TEGO® Dispers 760 W (4:1 to 1:1 active).

3. In case bubbles are generated during the pigment dispersion process, you can use high-efficiency but also Compatible defoaming

Agent concentrate (such as TEGO® Foamex 8050, TEGO® Foamex 810, TEGO® Foamex 830).

4. Add rheology modifier (such as gas phase II) to the inorganic pigment paste Silicon oxide) has been shown to be beneficial.

5. The starting formula for manufacturing color paste is available upon request.

Chemistry Structure

Aqueous copolymer solution with high pigment affinity groups

Technology Parameters

Project	Typical data
Appearance	Yellowish transparent liquid
Active ingredients	Ca.40%
Solvent	Water
PH value (original condition)	Ca. 6.5

Contact Suitability of food

Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6

Save Security

When stored in original unopened packaging between +4 and +40°C , the storage period of this product is at least 24 months from the date of manufacture.

pan>

Auxiliaries/monomers/solvents are listed in the Swiss Ordinance Schedule 817.023.21 A and Table B, Appendix 6

Save Security

When stored in original unopened packaging between +4 and +40°C , the storage period of this product is at least 24 months from the date of manufacture.

This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/68478