Epoxy curing agent Knowledge 2-Amino-4-chlorophenol 2-Amino-4-chlorophenol

2-Amino-4-chlorophenol 2-Amino-4-chlorophenol

广告位

2-amino-4-chlorophenol structural formula

Structural formula

Business number 02A1
Molecular formula C6H6ClNO
Molecular weight 143.57
label

5-Chloro-2-hydroxyaniline,

o-amino-p-chlorophenol,

2-amino-4-chlorophenol,

4-Chloro-2-aminophenol,

p-Chloro-o-aminophenol,

2-hydroxy-5-chloroaniline,

4-Chloro-2-aminophenol,

5-Chloro-2-hydroxyaniline,

H2NC6H3(Cl)OH,

4-Chloro-2-aminophenol,

p-Chloro-o-aminophenol,

5-Chloro-2-hydroxyaniline

Numbering system

CAS number:95-85-2

MDL number:MFCD00007694

EINECS number:202-458-9

RTECS number:SJ5700000

BRN number:774859

PubChem number:24892694

Physical property data

1. Appearance: White flaky crystal

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL , air=1): Undetermined

4. Melting point (ºC): 140~141

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 5.2kPa): Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Easily soluble in hot water, soluble in ethanol, ether, dilute acid and dilute alkali.

Toxicological data

1. Acute toxicity: Rat oral LD50: 690mg/kg; Mouse oral LD50: 1030mg/kg;

2. Mutagenicity

Microbial typhoid fever Salmonella mutation: 333μg/plate;

Ecological data

None

Molecular structure��Data

1. Molar refractive index: 37.26

2. Molar volume (cm3/mol): 102.0

3. Isotonic specific volume (90.2K ): 283.9

4. Surface tension (dyne/cm): 59.8

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 14.77

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 2

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: 5

6. Topological molecule polar surface area 46.2

7. Number of heavy atoms: 9

8. Surface charge: 0

9. Complexity: 99.1

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. It is irritating to the eyes, respiratory system and skin. Wear appropriate protective clothing if used in large quantities.

Storage method

Seal, dry, and store away from light.

Synthesis method

1.2-Nitro-p-chlorophenol sodium sulfide reduction method is obtained by nitrification and reduction of p-chlorophenol.

2. Hydrogenation reduction method of 2-nitro-p-chlorophenol 300g of 2-nitro-p-chlorophenol in a water-soluble suspension at a hydrogen pressure of 4.05Mpa and 60℃, PH=7 (60℃ ) conditions, using a nickel catalyst for reduction. The amount of hydrogen is 145L, and the pH is adjusted with 50g of sodium dihydrogen phosphate hydrate and 257.5g of sodium hydroxide (33%) aqueous solution. After the reaction is completed, release the pressure, wash with nitrogen and press it into the receiver, heat to 95°C, adjust pH to 10.7 (95°C) with sodium hydroxide, add activated carbon and diatomaceous earth, stir vigorously, and filter. Adjust the filtrate to pH=5.2 (20°C) with concentrated hydrochloric acid, cool to 0°C, filter and dry. Then it is treated with 4.5g of sodium bisulfite, filtered, and dried. This operation is repeated four times, and then distilled at 2.67kpa. The fractions around 80°C are collected and dried to obtain the product with a yield of 97.7%.

Purpose

Dye intermediates. Used to prepare acid medium RH, acidic complex violet 5RN and reactive dyes, etc. It can also be used to prepare the raw material drug chlorzoxazone.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/77968

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search