Epoxy curing agent Knowledge 4-Dimethylaminoantipyrine 4-Dimethylaminoantipyrine

4-Dimethylaminoantipyrine 4-Dimethylaminoantipyrine

广告位

4-dimethylaminoantipyrine structural formula

Structural formula

Business number 0198
Molecular formula C13H17N3O
Molecular weight 231.3
label

Analytical identification reagents

Numbering system

CAS number:58-15-1

MDL number:MFCD00003142

EINECS number:200-365-8

RTECS number:CD2625000

BRN number:None

PubChem number:24894178

Physical property data

1. Properties: White leaf-like crystals or crystalline powder. Odorless. Slightly bitter taste. Stable in air, but will decompose when exposed to sunlight.

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 107-109

5. Boiling point (ºC, normal pressure): Undetermined

6. Boiling point (ºC, 5.2kPa): Undetermined

7. Refractive index: Undetermined

8. Flash point (ºC): Undetermined

9. Specific rotation (º): Undetermined Determined

10. Autoignition point or ignition temperature (ºC): Not determined

11. Vapor pressure (kPa, 25ºC): Not determined

12. Saturated vapor pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit ( %, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: In the presence of moisture, it easily reacts with oxidants Have a chemical reaction. 1g product is dissolved in 1.5ml ethanol, 12ml benzene, 1ml chloroform, 13ml ether and 18ml water. Its solubility in water increases with the addition of sodium benzoate, and the aqueous solution is weakly alkaline to litmus.

Toxicological data

Low toxicity, LD50 (rat, oral) 1700 mg/kg. Irritating.

Ecological data

None

Molecular structure data

5. Molecular property data:

1. Molar refractive index: 68.33

2. Molar volume (cm3/mol): 196.0

3. Isotonic specific volume (90.2K): 518.8

4. Surface tension (dyne/cm): 49.0

5. Polarizability (10-24cm3): 27.08

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological moleculesPolar surface area 26.8

7. Number of heavy atoms: 17

8. Surface charge: 0

9. Complexity: 343

10. Number of isotope atoms: 0

11. Number of determined atomic stereocenters: 0

12. Number of uncertain atomic stereocenters: 0

13. Determined number of stereocenters of chemical bonds: 0

14. Uncertain number of stereocenters of chemical bonds: 0

15. Number of covalent bond units: 1

Properties and stability

None

Storage method

This product should be kept sealed, dry and protected from light.

Synthesis method

1. Obtained from catalytic hydrogenation (alkylation) of aminoantipyrine. First add water to the dissolving tank, heat it to 50-60°C, add aminoantipyrine under stirring, and pour it into the hydrogenation tank after it is completely dissolved. Wash the dissolving tank with water, mix it with the nickel catalyst and then add it to the hydrogenation tank. Evacuate the hydrogenation tank, then close the vacuum valve, pass in hydrogen, start stirring, and stop passing hydrogen when the pressure rises to 0.245MPa. Add formaldehyde and continue to pass hydrogen gas. The speed of adding formaldehyde is based on the standard of absorbing 1.8-2 cubic meters of hydrogen for every 5L of formaldehyde added. The reaction temperature is controlled at 60-85°C. After the formaldehyde is added, the reaction continues for 10 minutes and the test end point is reached. After passing the test, press filtrate, cool the filtrate to below 25°C, precipitate crystals, and filter out to obtain crude aminopyrine. Warm the crude aminopyrine, ethanol, and activated carbon to 75-80°C, stir and decolorize for 1 hour, and press filter. The filtrate is cooled to 10°C, crystals precipitate, filtered, washed with ethanol, and dried by airflow to obtain aminopyrine.

2.Crude aminopyrine is obtained by catalytic hydrogenation of aminoantipyrine. Raise the crude aminopyrine, ethanol and activated carbon to a certain temperature, stir and decolorize, press filter, cool and crystallize, wash and dry.

Purpose

1. Determination of antimony, bismuth, bromine, cadmium, chlorine, cobalt, copper, cyanide, gold, iron, iodic acid, lead, nickel, nitric acid, nitrite, osmium, nitrogen oxide, palladium, platinum , silver and zinc. Determination of copper, iron and silica.

2. Antipyretic and analgesic drugs, used for fever, headache, joint pain, neuralgia, dysmenorrhea and active rheumatism. Aminopyrine is a pyrazolone non-steroidal anti-inflammatory drug with strong antipyretic, analgesic, anti-inflammatory and anti-rheumatic effects. However, due to serious adverse reactions, such as agranulocytosis, aplastic anemia, etc. Therefore, its clinical application has been reduced day by day and is gradually being eliminated. Aminopyrine can also be used as an analytical reagent.

3.Aminopyrine can be used as an analytical reagent to determine antimony, bismuth, bromine, cadmium, chlorine, and cobalt , ketones, cyanides, gold, ferric iodic acid, lead, nickel, nitric acid, nitrites, osmium, nitrogen oxides, palladium, platinum, silver and zinc. It is also an antipyretic and analgesic drug, used for fever, headache, joint pain, neuralgia, dysmenorrhea and active rheumatism. Aminopyrine is a pyrazolone non-steroidal anti-inflammatory drug with strong antipyretic, analgesic, anti-inflammatory and anti-rheumatic effects. But it can easily cause agranulocytosis, aplastic anemia, etc. Its clinical application has been increasingly reduced.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/80920

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search