Epoxy curing agent Knowledge 4-Chloro-3-methylphenol 4-Chloro-3-methylphenol

4-Chloro-3-methylphenol 4-Chloro-3-methylphenol

广告位

4-chloro-3-methylphenol structural formula

Structural formula

Business number 01AG
Molecular formula C7H7ClO
Molecular weight 142.58
label

4-Chloro-3-methylphenol,

4-chlorom-cresol,

4-Chloro-3-methylphenol,

PCMC,

Fungicide

Numbering system

CAS number:59-50-7

MDL number:MFCD00002323

EINECS number:200-431-6

RTECS number:GO7100000

BRN number:1237629

PubChem number:24892794

Physical property data

1. Properties: Colorless crystals. Extremely pure products are odorless, often with a phenol smell. Can evaporate with water vapor.

2. Density (g/mL, 25/4℃): Undetermined

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): 66~68

5. Boiling point (ºC, normal pressure): 235

6. Boiling point (ºC, 5.2kPa): Not available Determined

7. Refractive index: Undetermined

8. Flash point (ºC): 160

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (kPa, 25ºC): Undetermined

12. Saturated vapor Pressure (kPa, 60ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: 20℃, 1g product dissolves in 260ml water, Slightly more soluble in hot water, easily soluble in ethanol, ether, benzene, acetone, chloroform and petroleum ether. Its aqueous solution turns yellow in light and air.

Toxicological data

1. Acute toxicity: rat oral LD50: 1830mg/kg; rat subcutaneous LD50: 400mg/kg; mouse oral LC50: 600mg/kg; mouse subcutaneous LC50: 360mg/kg; mouse intravenous LC50: 70mg/ kg2, other multiple dose toxicity: rat oral TDLo: 11200mg/kg/28D-I3, mutagenicity: mutation microorganismsTEST system: bacteria – Salmonella typhimurium: 25ug/plate; Mutation test system – not other specifiedTEST system: bacteria -E. coli: 100umol/L

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 37.85

2. ��� Mol volume (cm3/mol): 116.0

3. Isotonic specific volume (90.2K): 295.8

4. Surface tension (dyne/ cm): 42.1

5. Polarizability (10-24cm3): 15.00

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 0

5. Number of tautomers: 6

6. Topological molecule polar surface area 20.2

7. Number of heavy atoms: 9

8. Surface charge: 0

9. Complexity: 94.9

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Best range of use: It is more active in acidic media than in alkaline media. Its aqueous solution will turn yellow when exposed to light or contact with air. The presence of non-ionic surfactants will partially deactivate it and cause it to change color when exposed to iron salts.

Storage method

This product should be sealed and stored away from light.

Synthesis method

1. Reaction of m-cresol and dichlorosulfonyl. Under stirring, slowly add m-cresol to dichlorosulfonyl, and control the reaction temperature at 30-50°C. After adding, keep it warm for 16 hours, wash with water, wash with sodium carbonate solution until alkaline, and then wash with hot water until neutral. Separate the oil layer and dry it with anhydrous calcium chloride, filter out the desiccant and distill under reduced pressure. Pour the distillate into petroleum ether, cool, filter and dry to obtain the finished product. ​

Purpose

1. Antisepsis and disinfection. Used in organic synthesis, such as dyes, film preservatives, etc.

2.It is used as a preservative in protein shampoos and baby cosmetics, with a usage content (mass fraction) of 0.1% to 0.2%. The maximum allowable dosage (mass fraction) is 0.2%. It is also used in organic synthetic raw materials, pigment intermediates and film preservatives.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/82814

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search