Epoxy curing agent Knowledge Tetraethylammonium hydroxide Tetraethylammonium hydroxide

Tetraethylammonium hydroxide Tetraethylammonium hydroxide

广告位

Tetraethylammonium hydroxide structural formula

Structural formula

Business number 01MK
Molecular formula C8H21NO
Molecular weight 147.26
label

Tetraethylamine hydroxide,

N,N,N-triethylammonium hydroxide,

Tetraethylammonium hydroxide solution,

Tetraethylammonium hydroxide methanol,

TEA Hydroxide,

Used as polarographic analysis reagent

Numbering system

CAS number:77-98-5

MDL number:MFCD00009024

EINECS number:201-073-3

RTECS number:KH3150000

BRN number:3912961

PubChem number:24888410

Physical property data

1. Properties: The product is a 20% aqueous solution, which is a colorless or light yellow liquid.

2. Density (g/mL, 25/4℃): 1.023

3. Relative vapor density (g/mL, air=1): Uncertain

3. p>

4. Melting point (ºC): 40~50°C

5. Boiling point (ºC, normal pressure): 110°C

6. Boiling point (ºC, normal pressure) 5.2kPa): Uncertain

7. Refractive index: 1.4020

8. Flash point (ºC): 11°C

9. Specific optical rotation Degree (º): -44° (c=11.2, H2O)

10. Autoignition point or ignition temperature (ºC): Uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

12. Saturated vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature (ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (%, V/V): Uncertain

18. Explosion lower limit (%, V/V): Uncertain

19. Solubility: soluble in water.

Toxicological data

1. Acute toxicity

Mouse subcutaneous LC50: 107 mg/kg;

Frog gastrointestinal LDLO: 60 mg/kg;

Ecological data

None yet

Molecular structure data

None yet

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 4

5. Number of tautomers: none

6. Topological molecule polar surface area 1

7. Number of heavy atoms: 10

8. Surface charge: 0

9. Complexity: 47.5

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determined number of chemical bond stereocenters: 0

14. Uncertain number of chemical bond stereocenters: 0

15. Number of covalent bond units: 2

Properties and stability

Corrosive.

Storage method

This product should be kept sealed.

Synthesis method

1. First dissolve tetraethylammonium chloride in methanol, then add the theoretical amount of potassium hydroxide-methanol solution, mix thoroughly, and there will be potassium chloride Precipitation:

When the reaction is complete, let it stand and filter under reduced pressure. Add water to the resulting filtrate for vacuum distillation to remove alcohol and water, so that the tetraethylammonium hydroxide content in the solution reaches 44% , and then dried under vacuum, the resulting crystal is the finished product.
2. First dissolve tetraethylammonium iodide in water to make it a 15% solution, then add a theoretical amount of silver oxide, heat and keep warm in a water bath to complete the reaction:

Filter out the silver iodide, and the clean filtrate obtained is the finished product.

Purpose

1. Used as chemical reagents and acetylation of nucleosides, etc.

2.Used as polarographic analysis reagent to support electrolyte.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/83751

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search