Epoxy curing agent Knowledge Tetraethyl orthosilicate Tetraethyl orthosilicate

Tetraethyl orthosilicate Tetraethyl orthosilicate

广告位

Ethyl orthosilicate structural formula

Structural formula

Business number 01MR
Molecular formula C8H20O4Si
Molecular weight 208.33
label

Tetraethyl silicate,

Ethyl silicate,

Tetraethoxysilane,

Tetraethyl silicate,

Tetraethyl silicate,

Orthosilic acid tetraethyl ester,

Tetraethoxy silane,

Ethyl orthoxilicate,

silicone solvent,

weathering-resistant agent,

hardener,

Precision casting binder

Numbering system

CAS number:78-10-4

MDL number:MFCD00009062

EINECS number:201-083-8

RTECS number:VV9450000

BRN number:1422225

PubChem number:24888698

Physical property data

1. Properties: colorless transparent liquid with slight odor. [1]

2. Melting point (℃): -77[2]

3. Boiling point (℃): 165~169[3]

4. Relative density (water=1): 0.93[4]

5. Relative vapor density (air=1): 7.22[5]

6. Saturated vapor pressure (kPa): 0.13 (20℃)[6]

7. Octanol/water partition coefficient: 0.04[7]

8. Flash point (℃): 43 (OC); 37.2 ( CC)[8]

9. Ignition temperature (℃): 260[9]

10. Explosion limit (%): 575[10]

11. Lower explosion limit (%): 0.9[11]

12. Solubility: Slightly soluble in water, slightly soluble in benzene, soluble in ether, miscible in ethanol. [12]

13. Viscosity (mPa·s, 20ºC): 17.9

14. Refractive index (20ºC): 1.3928

Toxicological data

1. Acute toxicity[13] LD50: 6270mg/kg (rat oral); 6.3ml (5859mg)/kg (rabbit transdermal)

2. Irritation [14]

Rabbit transdermal: 500mg (24h), severe irritation.

Rabbit eye: 100mg, mild irritation.

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradability No information available

Molecular structure data

1. Molar refractive index: 54.80

2. Molar volume (cm3/mol): 221.7

3. Isotonic specific volume (90.2K ): 488.2

4. Surface tension (dyne/cm): 23.4

5. Polarizability (10-24cm3): 21.72 p>

Compute chemical data

1. Number of hydrogen bond donors: 0

2. Number of hydrogen bond acceptors: 4

3. Number of rotatable chemical bonds: 8

4. Topological molecular polar surface area (TPSA): 36.9

5. Number of heavy atoms: 13

6. Surface charge: 0

7. Complexity: 91.2

8. Number of isotope atoms: 0

9. Determine the number of atomic stereocenters: 0

10. The number of uncertain atomic stereocenters: 0

11. The number of determined chemical bond stereocenters: 0

12. Uncertain chemical bond stereocenters Quantity: 0

13. Quantity of covalent bond units: 1

Properties and stability

1. Stability[15] Stable

2. Incompatible substances[16] Strong oxidants, strong acids, strong bases

3. Conditions to avoid contact[17] Water

4. Polymerization hazard[18] No polymerization

5. Decomposition products[19] Silicon oxide

Storage method

Storage Precautions[20] Stored in a cool, dry and well-ventilated warehouse. Keep away from fire and heat sources. The storage temperature should not exceed 37°C. Keep container tightly sealed. They should be stored separately from oxidants, acids, and alkalis, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. In a 1000mL three-necked flask equipped with a reflux condenser, mechanical stirrer and dropping funnel, add 85g (0.5mol) silicon tetrachloride and 200mL ether, and cool in an ice bath. 92g (2mol) absolute ethanol was added dropwise under stirring. After the addition, heat to reflux on a water bath for 2 hours. After cooling, add sodium ethoxide to neutralize to neutrality, then evaporate the diethyl ether on a water bath, and then perform fractional distillation to obtain 88 g of the product tetraethyl orthosilicate, with a yield of 85%.

2. Preparation method: Silicon tetrachloride and anhydrous ethanol are esterified at normal temperature and pressure, HCL is removed by distillation, and the finished product is obtained after cooling, neutralization, and distillation:

Purpose

1. Used as electrical insulation materials, coatings, and optical glass treatment agents. Also used in organic synthesis.

2. Used in the manufacture of chemical-resistant coatings, heat-resistant coatings, silicone solvents and precision casting adhesives.

3. Used as heat-proof coatings, chemical-resistant coatings, and organic synthesis intermediates. [21]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/83816

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search