Epoxy curing agent Knowledge Diisobutyl phthalate Diisobutyl phthalate

Diisobutyl phthalate Diisobutyl phthalate

广告位

Diisobutyl phthalate structural formula

Structural formula

Business number 01UZ
Molecular formula C16H22O4
Molecular weight 278.35
label

1,2-Di(2-methylpropyl)phthalate,

Phthalic acid diisobutyl ester,

1,2-Benzenedicarboxylic acid,bis(2-methylpropyl)ester,

Plasticizer

Numbering system

CAS number:84-69-5

MDL number:MFCD00026480

EINECS number:201-553-2

RTECS number:TI1225000

BRN number:2054802

PubChem number:24887526

Physical property data

1. Properties: colorless transparent liquid

2. Density (g/cm3): 1.049

3. Boiling point (℃): 296.5

4. Flash point (℃): >110

5. Ignition point (℃): 182

6. Freezing point (℃): -50

7. Refractive index (n20D): 1.49

8. Viscosity (25℃, mPa·s): 36.4

9. Solubility: It has good compatibility with various cellulose and resins such as polyvinyl chloride, polystyrene, and polyvinyl acetate.

10. Melting point (ºC): -64

Toxicological data

1. Acute toxicity:

Rat caliber LD50: 15mg/kg;

Rat LD50: 20500mg/kg; Rat abdominal cavity LD50: 3750uL/kg;

p>

Mouse caliber LD50: 10mg/kg; mouse abdominal cavity LD50: 39900mg/kg;

Mouse LD50: 10500mg/kg;

Pig skin LD50: 10mg /kg;

2. Reproductive toxicity

Rat caliber TDL0: 8400 mg/kgSEX/DURATION; Rat abdominal TDL0: 1250 mg/kgSEX/DURATION

Mouse caliber TDL0: 16800 mg/kgSEX/DURATION; Mouse caliber TDL0: 32 mg/kgSEX/DURATION;

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 77.51

2. Molar volume (cm3/mol): 265.0

3. Isotonic specific volume (90.2K): 650.4

4. Surface tension (dyne/cm): 36.2

5. Polarizability (10-24cm3): 30.72

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 8

5. Number of tautomers: none

6. Topological molecule polar surface area 52.6

7. Number of heavy atoms: 20

8. Surface charge: 0

9. Complexity: 290

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Existing in mainstream smoke.�

2. Pollute the environment.

Storage method

Store in a cool, ventilated warehouse away from light, away from fire sources, and protected from sun and rain. Prevent moisture intrusion.

Synthesis method

1. Phthalic anhydride and isobutanol undergo a normal pressure liquid phase esterification reaction under the catalysis of sulfuric acid. Monoisobutyl phthalate is first generated, and then the esterification is continued to generate diisobutyl phthalate. The mass ratio of phthalic anhydride and isobutanol is 1:1.35~1:1.4, and the sulfuric acid is 0.3% of the sum of the weight of phthalic anhydride and isobutanol. The esterification time takes 5 to 6 hours. The reactants are neutralized with 5% soda ash aqueous solution, vacuum distilled, excess isobutanol is recovered, and finally decolorized with activated carbon and filtered to obtain the finished product.

2.The process flow for preparing diisobutyl phthalate from phthalic anhydride residue is as follows:

The process conditions are: the amount of catalyst is 10% of the total mass of the reactants, n (isobutanol) ∶n (phthalic anhydride) = 12:10, temperature 120~160℃, time 4h, the reaction is carried out under stirring. Distillation pressure ≤5.0kPa.

Purpose

1. It can be used as a plasticizer for cellulose resin, vinyl resin, nitrile rubber and chlorinated rubber. The plasticizing effect is similar to that of DBP, but its volatility and water extraction are greater than that of DBP, so it can be used as a substitute for DBP. This product is toxic to crops and is not suitable for use in agricultural PVC films. This product has low toxicity, and its oral LD50 in rats is 20-25g/kg. The United Kingdom, the Netherlands, and the United States allow this product to be used in food packaging materials. The United Kingdom stipulates that the maximum amount of this product in food packaging products made of polyvinyl chloride and vinyl chloride copolymer shall not exceed 40%.

2. It can be used as a plasticizer for polyvinyl chloride. The plasticizing effect is the same as that of di-n-butyl phthalate, but the volatility and water extraction loss are greater. It can be used as phthalic acid. Substitute for di-n-butyl ester. This product can also be used as a plasticizer for cellulose resin, vinyl resin, nitrile rubber and chloroprene rubber. This product is not suitable for use in the manufacture of agricultural films.

3. Used as plastic plasticizer. Has strong dissolving ability. It is mainly used in polyvinyl chloride plastics, but can also be used in rubber, adhesives and coatings. It has excellent softening effect and strong stability. It can also be used as a plasticizer for polyvinyl acetate, alkyd resin, ethyl cellulose and nitrocellulose. Its performance is similar to dibutyl phthalate, but its volatility and water extraction loss are large, and its durability is not ideal. This product has low toxicity and can be used as a plasticizer for food packaging materials.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/86136

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search