Epoxy curing agent Knowledge Nitrile Butyroiutrile

Nitrile Butyroiutrile

广告位

Nitrile structural formula

Structural formula

Business number 02ZN
Molecular formula C4H7N
Molecular weight 69.11
label

n-butyronitrile,

n-Butyronitrile,

Nitrile C4,

Propyl cyanide,

Nitrogen-containing compound solvents,

aliphatic compounds,

synthetic raw materials,

Intermediates

Numbering system

CAS number:109-74-0

MDL number:MFCD00001968

EINECS number:203-700-6

RTECS number:ET8750000

BRN number:1361452

PubChem ID:None

Physical property data

1. Properties: colorless liquid with pungent odor. [1]

2. Melting point (℃): -112[2]

3. Boiling point (℃): 117.5[3]

4. Relative density (water = 1): 0.80[4]

5. Relative vapor Density (air=1): 2.4[5]

6. Saturated vapor pressure (kPa): 2.0 (20℃)[6]

7. Heat of combustion (kJ/mol): -2568.68[7]

8. Critical temperature (℃): 309.1[8]

9. Critical pressure (MPa): 3.8[9]

10. Octanol/water partition coefficient: 0.53 [10]

11. Flash point (℃): 24 (OC) [11]

12. Ignition temperature (℃ ): 501[12]

13. Explosion upper limit (%): 11.4[13]

14. Explosion lower limit (%): 1.65[14]

15. Solubility: Slightly soluble in water, miscible in ethanol, ether, dimethylformamide, soluble in benzene. [15]

16. Refractive index (15ºC): 1.3860

17. Viscosity (mPa·s, 15ºC): 0.624

18. Viscosity (mPa·s, 30ºC): 0.515

19. Flash point (ºC): 501

20. Heat of evaporation (KJ/mol, 25ºC): 37.01

21. Heat of fusion (KJ/mol): 5.02

22. Heat of formation (KJ/mol, 25ºC): -5.82

23. Solubility (% ,25ºC, water): 3.3

Toxicological data

1. Acute toxicity[16]

LD50: 50mg/kg (rat oral); 27.7mg/kg (mouse Oral); 400mg/kg (rabbit transdermal)

LC50: 702mg/m3 (mouse inhalation, 1h)

2 . Irritation[17]

Rabbit transdermal: 395mg, mild irritation (open irritation test).

Rabbit eye: 500mg (24h), mild irritation.

3. Others[18] The minimum toxic concentration (TCLo) for inhalation in rats: 200ppm (6h) (gestation 6~20d), causing embryonic damage toxicity.

Ecological data

1. Ecotoxicity No data available

2. Biodegradability No data available

3 .Non-biodegradability[19] In the air, when the concentration of hydroxyl radicals is 5.00×105/cm3 When, the degradation half-life is 32d (theoretical��).

Molecular structure data

1. Molar refractive index: 20.49

2. Molar volume (cm3/mol): 87.9

3. Isotonic specific volume (90.2K ): 199.5

4. Surface tension (dyne/cm): 26.5

5. Polarizability (10-24cm3): 8.12

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 1

5. Number of tautomers: none

6. Topological molecule polar surface area 23.8

7. Number of heavy atoms: 5

8. Surface charge: 0

9. Complexity: 47.9

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Stability[20] Stable

2. Incompatible substances[21] Strong acid, strong alkali, strong reducing agent, strong oxidizing agent

3. Polymerization hazard[22] No polymerization

Storage method

Storage Precautions[23] Store in a cool, well-ventilated special warehouse, and implement the “two people to send and receive, and two people to keep” system. Keep away from fire and heat sources. The storage temperature should not exceed 37°C. Keep container tightly sealed. They should be stored separately from reducing agents, acids, alkalis, and food chemicals, and avoid mixed storage. Use explosion-proof lighting and ventilation facilities. It is prohibited to use mechanical equipment and tools that are prone to sparks. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Obtained from the oxidation of butene and ammonia

2. Obtained from the catalytic oxidation of butanol and ammonia.

3. Mixed with hydrocarbons In this case, acetonitrile can be added and removed by azeotropic distillation. If it contains isonitrile impurities, use concentrated hydrochloric acid to decompose and remove them. Moisture is removed with magnesium sulfate or phosphorus pentoxide. Finally refined through distillation.

Purpose

1. Used as intermediates, raw materials for organic synthesis, solvents, and other fine chemicals.

2. Used as chemical drugs and pharmaceutical intermediates. [24]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/86515

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search