Epoxy curing agent Knowledge Phenylacetic acid Phenylacetic acid

Phenylacetic acid Phenylacetic acid

广告位

Phenylacetic acid structural formula

Structural formula

Business number 02PA
Molecular formula C8H8O2
Molecular weight 136.15
label

Phenyl acetic acid,

phenylalanine,

Alpha-toluic acid,

Phenylacetic acid,

Acidephenylacetique,

Benzenacetic acid,

Kyselina fenyloctova,

Pesticide intermediates; aromatic carboxylic acids and their derivatives,

acidic solvent

Numbering system

CAS number:103-82-2

MDL number:MFCD00004313

EINECS number:203-148-6

RTECS number:AJ2430000

BRN number:1099647

PubChem ID:None

Physical property data

1. Properties: White powder, with a special odor, slightly sour, and a civet-like turbid and floral undertone. The aroma is strong and the fragrance is very long-lasting.

2. Density (g/mL, 77℃): 1.081

3. Relative vapor density (g/mL, air=1): ~4

4. Melting point (ºC): 77.5

5. Boiling point (ºC, normal pressure): 265.5

6. Boiling point (ºC, 1.33×10-3kPakpa): 65-70

7. Relative density (25℃, 4℃): 1.09177.5

8. Flash point (ºC): 132

9. Crystal phase standard combustion heat (enthalpy) (kJ·mol-1): -3892.8

10. Crystal phase standard claims heat (enthalpy) (kJ·mol-1): -397.61

11. Vapor pressure (mmHg, 97ºC): 1

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. The logarithmic value of the oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Slightly soluble in water, soluble in ethanol, ether, ammonia, and also soluble in sodium carbonate and ammonia solutions, and miscible with grease and oily spices.

Toxicological data

1. Acute toxicity: Rat oral LD50: 2250mg/kg;

Rat peritoneal cavity LD50: 1600mg/kg;

Mouse oral LD50: 2250mg/kg;

Mouse peritoneal cavity LD50: 2270mg/kg;

&n3mol), water 200mL. Sodium hydroxide 40g (1mol), heated to reflux for 1.5h. Cool and acidify with hydrochloric acid until it becomes acidic to the red test paper. The precipitated solid was filtered, washed with a small amount of cold water, and dried to obtain 33 g of phenylacetic acid (1), with a yield of 82%. Phenylacetic acid is recrystallized from water to obtain colorless flake crystals. [2]

5. Preparation method:

In a reaction bottle equipped with a stirrer, thermometer, reflux condenser, and dropping funnel, add 4.8g (0.2mol) clean magnesium chips and one grain of iodine, and slowly add benzyl chloride (2) Prepare 20 mL of a solution of 25.4 g (0.2 mol) and 80 mL of anhydrous ether. Heat slowly to start the reaction. Keep boiling and add the rest of the solution dropwise. After the addition was completed, the reaction was continued with reflux and stirring for 0.5 h. Cool in an ice water bath, add dry carbon dioxide gas, and the reaction will be exothermic. After about 2 hours of passage, the reaction temperature dropped. The surface reaction is over. Add 50g of ice water to the reaction solution, and adjust it with dilute hydrochloric acid until it becomes acidic to the Congo red test paper. The ether layer was separated, and the aqueous layer was extracted once with ether. Combine the ether layers and extract the ether layer with excess sodium hydroxide solution. The ether layer was separated, and the aqueous layer was acidified with dilute hydrochloric acid to precipitate crude phenylacetic acid. After suction filtration and recrystallization with water, 16 g of phenylacetic acid (1) was obtained, mp78°C, yield 59%. [3]

Purpose

1. Phenylacetic acid is an intermediate in organic synthesis of medicines, pesticides, spices, etc.

2. Used in the production process of penicillin to increase the total output of penicillin G and used as a raw material for the preparation of spices. It can also be used in baked goods, meat products, and sweet sauces.

3. Can be used in tobacco flavors, especially in Havana cigar flavor.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/87188

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search