Epoxy curing agent Knowledge Aldehyde Lagotis Aldehyde Lagotis

Aldehyde Lagotis Aldehyde Lagotis

广告位

Aldehyde Lagotis Aldehyde Lagotis

<img src="http://staticv5.basechem.org/img/tupu/old/5a9e9cd27f0847a7ab337f1ff46067f3.gif" alt="Structural formula of aldehyde"

Structural formula

Business number 02PK
Molecular formula C13H18O
Molecular weight 190.28
label Cyclamen aldehyde; 2-methyl-3-(p-cumyl)-propionaldehyde, Cyclamen aldehyde, 2-methyl-3-(p-cumene-yl)-propionaldehyde, artificial flavors

Numbering system

CAS number:103-95-7

MDL number:MFCD00024160

EINECS number:203-161-7

RTECS number:MW4900000

BRN number:None

PubChem number:24901301

Physical property data

1. Properties: colorless to light yellow crystals

2. Density (g/mL, 20℃): 0.950

3. Relative density (20℃, 4℃ ): 0.95115

4. Relative density (25℃, 4℃): 0.945940

5. Boiling point ( ºC, normal pressure): 270

6. Boiling point (ºC, 0.27kPa): 108.5

7. Refractive index: 1.505

8. Refractive index at room temperature (n20): 1.6195

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, 20.2ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13 . Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Logarithmic value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion Lower limit (%, V/V): Undetermined

19. Solubility: Soluble in ethanol (1ml dissolved in 3mL 80% ethanol) and most fats and oils, insoluble in glycerin and water, almost insoluble in Propylene glycol.

Toxicological data

1. Skin/eye irritation: Standard Dresser test: human skin contact, 15mg/48 HREACTION SEVERITY, mild reaction; Standard Dresser test: rabbit eye contact, 100mgREACTION SEVERITY, mild reaction; 2. Acute toxicity: rats Oral LD50: 3810mg/kg; Rat skin contact LD50: >5mg/kg;

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 59.39

2. Molar volume (cm3/mol): 203.0

3. Isotonic specific volume (90.2K ): 484.7

4. Surface tension (dyne/cm): 32.4

5, Dielectric constant:

6, Dipole moment (10-24cm3):

7, Polarization Rate: 23.54

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): 3.3

2. Number of hydrogen bond donors: 0

3. Number of hydrogen bond acceptors: 1

4. Number of rotatable chemical bonds: 4

5. Number of tautomers: 2

6. Topological molecule polar surface area 17.1

7. Number of heavy atoms: 14

8. Surface charge: 0

9. Complexity: 166

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 1

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

Colorless to light yellow liquid with strong melon and floral aroma, including Roman melon aroma. Soluble in ethanol (1ml dissolved in 3mL 80% ethanol) and most fats and oils, insoluble in glycerol and water, almost insoluble in propylene glycol. Stable in alkali.

Storage method

None yet

Synthesis method

Synthesis using cuminyl chloride as raw material
Add 174 parts of ethyl malonate into a 10% ethanol solution containing 68 parts of sodium ethoxide, heat to reflux, and then slowly add 168.5 parts of industrial cuminyl chloride dropwise. When the reaction ends (the alkalinity disappears), add 1200 parts of 10% sodium hydroxide solution and heat to reflux for 4 hours. After the ethanol is evaporated, the reactant is acidified with hydrochloric acid, and the resulting cuminylmethylmalonic acid is heated to 185°C until no carbon dioxide escapes. The product was fractionated under reduced pressure, and the 153~157°C (533Pa) fraction was collected, which is p-isopropyl-α-methyldihydrocinnic acid containing a small amount of ortho derivatives, with a yield of 90%.
Put the above product together with formic acid through a reaction tube with a temperature controlled at 350°C and equipped with MnO2/pumice, and then convert it into aldehyde, with a yield of 80%. The crude product is distilled under reduced pressure, and the 118-120°C (800Pa) fraction is collected to obtain the finished product.
Synthesis using cumine aldehyde as raw material
Dissolve 10kg potassium hydroxide in 400kg ethanol, mix with cumine aldehyde at 10°C, slowly drop 60kg propionaldehyde under stirring within 2 to 6 hours Put it into it and keep the temperature at 10~15℃. Neutralize the reactants with acetic acid, first evaporate the ethanol under normal pressure, then distill under reduced pressure to recover about 45kg of unreacted cumyl aldehyde, and then collect the 152-158°C (1200Pa) fraction, which is p-isopropyl-α-methyl Cinnamaldehyde has a refractive index of 1.5860.
Dissolve the above product in ethanol, place it in an autoclave, add 10% mass of reduced nickel or palladium-carbon catalyst, and perform hydrogenation at 100°C. Afterwards, the catalyst is filtered off, the solvent is recovered by distillation under normal pressure, fractionated under reduced pressure, and the 133~137°C (1.2kPa) fraction is collected, which is the product.

Purpose

Prepare food flavors and floral daily flavors. Products with lower levels are used in soap formulations, while higher levels are used in perfume formulations. Product quality: aldehyde content 85%.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/87330

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search