Epoxy curing agent Knowledge Pimelic acid Pimelic acid

Pimelic acid Pimelic acid

广告位

Pimelic acid structural formula

Structural formula

Business number 032V
Molecular formula C7H12O4
Molecular weight 160.17
label

Syzygous acid,

1,5-Pentanedicarboxylic acid,

1,7-Pimelic acid,

1,7-Heptanedioic acid,

1,5-pentanedicarboxylic acid,

Heptanedioic acid,

aliphatic compounds,

acidic solvent

Numbering system

CAS number:111-16-0

MDL number:MFCD00004425

EINECS number:203-840-8

RTECS number:TK3677000

BRN number:1210024

PubChem number:24887550

Physical property data

1. Properties: colorless monoclinic columnar crystal

2. Density (g/mL, 20℃): 1.329

3. Relative density (20℃, 4℃ ): 1.32915

4. Melting point (ºC): 105.7~105.8

5. Boiling point (ºC, normal pressure): 272100

6. Boiling point (ºC, 13.3kPa): 212 (1333pa)

7. Crystal phase standard combustion heat (enthalpy) (kJ·mol -1): -3460.17

8. Crystal phase standard claims heat (enthalpy) (kJ·mol-1): -1009.39

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC): Undetermined

11. Vapor pressure (mmHg, 25ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): 568.85

15. Critical pressure (MPa): 3.28

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility : Easily soluble in alcohol and ether, almost insoluble in cold benzene.

20. Flash point (ºC): 181.9

Toxicological data

1. Acute toxicity: Rat oral LD5O: 7gm/kg

Mouse oral LD5O: 4800mg/kg

Ecological data

Slightly harmful to water.

Molecular structure data

5. Molecular property data:

1. Molar refractive index: 37.60

2. Molar volume (cm3/mol): 133.3

3. Isotonic specific volume (90.2K): 354.2

4. Surface tension (dyne/cm): 49.8

5.Polarizability (10-24cm3): 14.90

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 4

4. Number of rotatable chemical bonds: 6

5. Number of tautomers: none

6. Topological molecule polar surface area 74.6

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 125

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with oxides.

2. Found in flue-cured tobacco leaves, burley tobacco leaves, and oriental tobacco leaves.

3. Can be sublimated.

Storage method

Stored sealed in a cool, dry place. Ensure that the workspace has good ventilation facilities and is stored away from sources of fire and oxidants.

Ecology: Slightly harmful to water.

Synthesis method

1. Put metallic sodium into isoamyl alcohol at 100°C, continue heating to cause vigorous reflux, and add dropwise a solution of salicylic acid dissolved in isoamyl alcohol. After the reflux reaction is completed, cool to 100°C, add hot water while stirring, let it stand, separate the water layer for steam distillation, remove all the isoamyl alcohol, and collect the distillate until a certain amount is reached. Cool the contents in the distillation bottle, add concentrated hydrochloric acid, and then perform steam distillation to remove salicylic acid. The residue is then concentrated until sodium chloride is precipitated, and a mixture of pimelic acid and sodium chloride is precipitated by cooling. The mixture was extracted with benzene, and pimelic acid was concentrated and crystallized from the extract. The yield is 43-50%.

2. Tobacco: OR, 44; FC, 54; BU, 26.

3. Obtain monoclinic prisms from benzene.

4. Preparation method:

In a reaction bottle equipped with a stirrer and a reflux condenser, add 18g (0.148mol) of pimelonitrile (2), 50% (mass) 250g of sulfuric acid, heated to reflux with stirring for 9 hours. A solid precipitates after cooling. filter. The filtrate was saturated with ammonium sulfate, extracted with ether three times, 50 mL each time, and the ether layers were combined. Dissolve the filtered solid in the diethyl ether layer, dry it over anhydrous sodium sulfate, evaporate the solvent, and recrystallize the remaining solid with benzene containing 5% diethyl ether to obtain 22g of pure pimelic acid (1), mp105~106 ℃, yield 93%. [1]

Purpose

For biochemical research.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/88631

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search