Epoxy curing agent Knowledge N-Methyldiethanolamine N-Methyldiethanolamine

N-Methyldiethanolamine N-Methyldiethanolamine

广告位

N-methyldiethanolamine structural formula

Structural formula

Business number 02S0
Molecular formula C5H13NO2
Molecular weight 119.16
label

2,2′-methyliminoethanolamine,

N,N-bis(2-hydroxyethyl)methylamine,

Methyldiethanolamine,

2,2′-Methyliminodiethanol,

N,N-Bis(2-hydroxyethyl)methylamine,

MDEA

Numbering system

CAS number:105-59-9

MDL number:MFCD00002848

EINECS number:203-312-7

RTECS number:KL7525000

BRN number:1734441

PubChem ID:None

Physical property data

1. Properties: colorless or dark yellow oily liquid.

2. Density (g/mL, 25℃): 1.0377

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): -21

5. Boiling point (ºC, normal pressure): 247.2

6. Boiling point (ºC, mmHg): Undetermined

7. Refractive index: 1.4678

8. Flash point (ºC): 127

9. Specific rotation (º): Undetermined

10. Autoignition point or ignition temperature (ºC):

11. Vapor pressure (mmHg, 20ºC): Not determined

12. Saturated vapor pressure (kPa, ºC): Not determined Determined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa ): Undetermined

16. Log value of oil-water (octanol/water) partition coefficient: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Lower explosion limit (%, V/V): Undetermined

19. Solubility: Miscible with water and alcohol. Slightly soluble in ether.

Toxicological data

1. Skin/eye irritation: Start irritation test: rabbit skin contact, 502mgREACTION SEVERITY, slight reaction; 2. Acute toxicity: rat oral LD50: 4780mg/kg; mouse peritoneal cavity LD50: 500mg/kg; rabbit skin contact LD50: 5990μL/kg;

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 32.00

2. Molar volume (cm3/mol): 113.3

3. Isotonic specific volume (90.2K ): 290.2

4. Surface tension (dyne/cm): 43.0

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 12.68

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -1.1

2. Number of hydrogen bond donors: 2

3. Number of hydrogen bond acceptors: 3

4. Number of rotatable chemical bonds: 4

5. Number of tautomers: none

6. Topological molecule polar surface area 43.7

7. Number of heavy atoms: 8

8. Surface charge: 0

9. Complexity: 43.7

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. Avoid contact with oxidants.

2.The oral LD50 of this product in rats is 4.78mg/kg.

Storage method

Stored in a cool, ventilated warehouse. Keep away from fire and heat sources. should be kept away from oxidizer, do not store together. Keep away from light. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

1. Obtained from the reaction of formaldehyde and diethanolamine. Add formic acid to the reaction pot and heat to boiling. Add the mixture of formaldehyde and diethanolamine dropwise while stirring. The dripping is completed in about 1 hour. Maintain the temperature at 90-98°C and continue to reflux for 4 hours. Then perform vacuum distillation and collect the 120-130°C (0.53kPa) fraction to obtain N-methyldiethanolamine with a yield of 85%.

2. Obtained from the reaction of methylamine and ethylene oxide. Keep the temperature below 30°C, and pass ethylene oxide gas into the 20% methylamine solution to perform the addition reaction until the relative density of the reaction solution reaches 1.025. Stir for 15 minutes, and the end point is when the relative density remains unchanged. Recover methylamine under normal pressure to 103°C. After distilling water under reduced pressure, collect the 119-170°C (4.67kPa) fraction. That is the finished product. The yield is 72%. Raw material consumption quota: ethylene oxide 950kg/t, methylamine (40%) 870kg/t. In addition, N-methyldiethanolamine can also be produced by using formaldehyde and cyanoethanol as raw materials through catalytic hydrogenation.

Purpose

Mainly used as emulsifier and acid gas absorbent, and also used as an intermediate for anti-tumor drugs.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/89282

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search