Epoxy curing agent Knowledge Benzalacetone Benzalacetone

Benzalacetone Benzalacetone

广告位

Benzylidene acetone structural formula

Structural formula

Business number 03F6
Molecular formula C10H10O
Molecular weight 146
label

α-phenbutene-γ-one,

Styrobutene-[1]-one-[3],

Stenbutenone,

Methyl styryl ketone,

Methyl styrene ketone,

Methylcinnamyl ketone,

4-phenyl-3-buten-2-one,

(3E)-4-Phenyl-3-buten-2-one,

1-Buten-3-one-1-phenyl,

2-Phenylvinyl methyl ketone,

4-phenyl-3-buten-2-one,

4-Phenylbutenone,

Acetocinnamone,

Aromatic aldehydes, ketones and their derivatives

Numbering system

CAS number:122-57-6

MDL number:MFCD00008779

EINECS number:204-555-1

RTECS number:EN0330000

BRN number:742046

PubChem number:24848836

Physical property data

1. Properties: white or light yellow crystal. Combustible. Has a coumarin smell.

2. Density (g/mL, 15/15℃): 1.0377

3. Refractive index (nD20): 1.5836

4. Flash point (℃): 65

5. Melting point (℃): 41.5

6. Boiling point (ºC): 260-262℃, 161℃ (5.3 kPa), 126-128℃ (1.2kPa)

7. Solubility: Easily soluble in sulfuric acid, ethanol, ether, benzene and chloroform, slightly soluble in water and petroleum ether.

Toxicological data

1. Acute toxicity: Rat oral LD50: 2030 mg/kg

Mouse peritoneal cavity LC 50: 1210 mg/kg

Mouse intravenous injection LC50: 112 mg /kg

Ecological data

None yet

Molecular structure data

1. Molar refractive index: 46.80

2. Molar volume (cm3/mol): 144.0

3. Isotonic specific volume (90.2K ): 355.0

4. Surface tension (dyne/cm): 36.9

5. Dielectric constant:

6. Dipole moment (10-24cm3):

7. Polarizability: 18.55

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): None

2. Number of hydrogen bond donors: 0

3.�Number of � bond receptors: 1

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: 2

6. Topological molecules Polar surface area 17.1

7. Number of heavy atoms: 11

8. Surface charge: 0

9. Complexity: 152

10. Number of isotope atoms: 0

11. Number of determined atomic stereocenters: 0

12. Number of uncertain atomic stereocenters: 0

13. Determine the number of stereocenters of chemical bonds: 1

14. Uncertain number of stereocenters of chemical bonds: 0

15. Number of covalent bond units: 1

Properties and stability

1. However, it can irritate the skin and mucous membranes and cause blistering.

2.The color becomes darker when exposed to light. It is easy to decompose when heated for a long time.

3. Found in flue-cured tobacco leaves.

Storage method

1. Production equipment should be sealed, and operators should wear protective gear to avoid contact with skin. Maintain good ventilation in the workshop.

2. Packaged in iron drums lined with plastic bags. Flammable, should be stored away from light. Store in a cool, ventilated place.

Synthesis method

1. It is obtained by condensing benzaldehyde with acetone. Mix acetone, benzaldehyde, and water. After cooling, slowly add 10% sodium hydroxide solution. Control the temperature at 25-31°C. Continue stirring for 1 hour after the addition. Then add dilute hydrochloric acid to neutralize to pH 6-7, leave it for 1 hour, and separate a yellow oil. The lower layer is extracted with benzene, the extract and the oil are combined, washed twice with water, the water layer is separated, the benzene is recovered, dried with calcium chloride, added with dry decolorizing carbon, filtered, and the filtrate is distilled under reduced pressure to obtain the finished product. Reference specifications of this product: melting point 40-42℃, boiling point 123-126℃ (1.07kPa). The melting point of 99% of products in the international market is 39-41°C. Raw material consumption quota: benzaldehyde 1700kg/t, acetone 2900kg/t, liquid caustic soda (40%) 500kg/t.

2. Tobacco: FC, 18 .

3. Preparation method:

In a reaction bottle equipped with a stirrer, thermometer, reflux condenser, and dropping funnel, add newly distilled benzaldehyde (1) 15.8g (0.15mol), acetone 24g (0.4mol), water 15mL. Add 4 mL of 10% sodium hydroxide aqueous solution dropwise while stirring, control the dropping speed, and maintain the reaction temperature between 25 and 31°C . After the addition was completed, the reaction was stirred at room temperature for 2 h. Neutralize to neutrality with dilute hydrochloric acid. The upper oil layer was separated, and the aqueous layer was extracted twice with benzene. Combine the organic layers, wash with water, and dry over anhydrous magnesium sulfate. First steam out the benzene, and then distill under reduced pressure. Collect the fractions at 148~160℃/3.33kPa or 133~143℃/2.13kPa, 4-phenyl-3-butene. -2-one (1) 20g, solidified after cooling, yield 91%, mp40~42℃. Note: ① Benzaldehyde is washed and dried with 5% sodium carbonate solution before distillation. ②Increasing the dosage of acetone can reduce the occurrence of side reactions. ③The reaction temperature should be strictly controlled. If the temperature is too high, the reaction solution will turn black and the yield will decrease. [1]

Purpose

1. Organic synthesis intermediates. Can be used as an anti-volatile agent for spices. In the dyeing industry, it is used as a mordant and fixing agent, to prepare spices or flavoring agents, and to prepare galvanizing brightening agents.

2. Used as an additive for electroplating zinc to increase the brightness of the coating.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/89733

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search