Epoxy curing agent Knowledge 2-Chloroethanol 2-Chloroethanol

2-Chloroethanol 2-Chloroethanol

广告位

2-chloroethanol structural formula

Structural formula

Business number 02UL
Molecular formula C2H5ClO
Molecular weight 80.51
label

Chlorohydrin,

Ethylene chlorohydrin,

2-chloroethanol,

1-Chloro-2-hydroxyethane,

2-Chloroethyl alcohol,

HOCH2CH2Cl,

1-Chloro-2-hydroxyethane,

2-Chloroethanol,

2-Chloro-1-ethanol,

2-Chloroethyl alcohol,

Ethylene chlorohydrin,

sugarcane germination accelerator,

Multifunctional solvent

Numbering system

CAS number:107-07-3

MDL number:MFCD00002829

EINECS number:203-459-7

RTECS number:KK0875000

BRN number:878139

PubChem ID:None

Physical property data

1. Properties: colorless and transparent liquid.

2. Boiling point (ºC, 101.3kPa): 128.8

3. Melting point (ºC): -67

4. Relative density (g/mL, 20/4ºC): 1.2007

5. Relative vapor density (g/mL, air=1): 2.78

6. Refractive index (n20ºC): 1.4421

7. Viscosity (mPa·s, 20ºC): 3.4

8. Flash point (ºC, opening): 60

9. Fire point (ºC): 425

10. Heat of evaporation (KJ/mol, b.p.): 41.45

11. Heat of fusion (KJ/mol): 1215.0

12. Heat of generation (KJ/mol , liquid): 294.3

13. Heat of combustion (KJ/mol, liquid): 1193.7

14. Lower explosion limit (%, V/V): 4.9

15. Explosion upper limit (%, V/V): 15.9

16. Vapor pressure (kPa, 30.3ºC): 1.33

17. Volume expansion coefficient (K-1,55ºC): 0.00092

18. Solubility: miscible with water, acetone, ether, slightly soluble in carbon tetrachloride and hydrocarbons.

19. Refractive index at room temperature (n25): 1.4401

20. Relative density (25℃, 4℃): 1.191230

21. The liquid phase standard claims heat (enthalpy) (kJ·mol-1): -294.1

Toxicological data

1. Acute toxicity: rat oral LD50: 95mg/kg; rabbit skin LD50: 67mg/kg

                                  �Ethanol.

2. Refining method: 2-chloroethanol is composed of ethylene oxide and Prepared from aqueous solutions of hydrochloric acid or chlorine. Therefore contain small amounts of acid and ethylene oxide derivatives. During refining, use anhydrous sodium sulfate and anhydrous potassium carbonate to dehydrate, deacidify and then fractionate.

3.Use 32% industrial chloroethanol as raw material, use benzene for azeotropic distillation, further remove water, and then remove it by vacuum distillation The remaining benzene and
high boiling matter are removed to obtain the finished product.
4. In the presence of ferric chloride and sodium dihydrogen phosphate, anhydrous hydrogen chloride and ethylene oxide are directly added
to produce 2-chloroethanol with a content of more than 98%

Purpose

1. Used as a solvent for cellulose esters, coatings, resins, etc. It is also used in the manufacture of ethylene glycol, ethylene oxide, acrylonitrile, medicines, pesticides, dyes, etc. and as a sugarcane germination accelerator.

2. Used as a solvent for organic synthesis of dyes, pesticides, insecticides, etc.

3. Used in pharmaceuticals, tanning, synthetic surfactants, demulsifiers and emulsifiers, and can also produce ethylene oxide and ethylene glycol. It can be used as a solvent in liquid ink.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/90528

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search