Epoxy curing agent Knowledge Tetraethylenepentamine Tetrathylenepentamine

Tetraethylenepentamine Tetrathylenepentamine

广告位

Tetraethylenepentamine Structural Formula

Structural formula

Business number 0364
Molecular formula C8H23N5
Molecular weight 189.30
label

Tetraethylene pentamine,

Tetraethylenediamine triacetate,

Tetraethylenepentamine,

Tetraethylenepentamine,

Tetraethylenepentamine,

Tetraethylpentylamine,

1,4,7,10,13-Pentaazatridecane,

TPA,

TEPA,

Hardener,

Vulcanizing agent for fluorine rubber,

lubricants,

Additives for cyanide-free plating

Numbering system

CAS number:112-57-2

MDL number:MFCD00008168

EINECS number:203-986-2

RTECS number:KH8585000

BRN number:506966

PubChem number:24899938

Physical property data

1. Properties: yellow or orange-red viscous liquid.

2. Density (g/mL, 20/20℃): 0.9980

3. Density (g/mL, 20/4℃): 0.9939

4. Relative vapor density (g/mL, air=1): 6.53

5. Melting point (ºC): -30

6. Boiling point (ºC, normal pressure): 333

7. Refractive index (20ºC): 1.5042

8. Flash point (ºC): 163

9. Autoignition point or ignition temperature (ºC): 321

10. Vapor pressure (mmHg, 20ºC): <0.01

11. Vapor pressure (kPa, 20ºC): <0.0013

12. Solubility: Easily soluble in water , soluble in ethanol, insoluble in benzene and ether, miscible in methanol, acetone, etc.

Toxicological data

1. Acute toxicity: Rat oral LD50: 205 mg/kg; Rabbit dermal LD50: 660 mg/kg

2. Irritation data:

Skin – Rabbit 5 mg/24 hours Severe; Ocular – Rabbit 100 mg/24 hours Moderate.

3. It can irritate the skin and mucous membranes and cause skin allergies and bronchial asthma. Long-term exposure can cause leukopenia, lower blood pressure, bronchiectasis, etc.

Ecological data

None

Molecular structure data

1. Molar refractive index: 56.96

2. Molar volume (cm3/mol): 194.3

3. Isotonic specific volume (90.2K ): 492.3

4. Surface tension (dyne/cm): 41.1

5. Polarizability (10-24cm3): 22.58

Computing chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -2.9

2. Number of hydrogen bond donors: 5

3. Number of hydrogen bond acceptors: 5

4. Number of rotatable chemical bonds: 10

5. Number of tautomers: none

6. Topological molecule polar surface area 88.1

7. Number of heavy atoms: 13

8. Surface charge: 0

9. Complexity: 78.6

10. Number of isotope atoms: 0

11. Determine the number of atomic stereocenters: 0

12. Uncertain number of atomic stereocenters: 0

13. Determine the number of chemical bond stereocenters: 0

14. Number of uncertain chemical bond stereocenters: 0

15. Number of covalent bond units: 1

Properties and stability

1. This product is unstable, flammable and easy to decompose. Avoid contact with strong oxidants, strong acids, and strong alkali.

Viscous liquid, hygroscopic. Soluble in water and most organic solvents.

Dew can absorb moisture and carbon dioxide when placed in the air. Alkaline. It decomposes when heated to release ethylenediamine and diethylenetriamine. It reacts with acid to form the corresponding salt. Combustible and toxic. It is a strongly alkaline and corrosive liquid. Direct contact with human body should be avoided. Chemical properties are strongly alkaline. Chemical properties are similar to diethylenetriamine. Ethylenediamine and diethylenetriamine are generated during pyrolysis

2.This product is a strongly alkaline and corrosive liquid. It can irritate the skin and mucous membranes and cause skin allergies and bronchial asthma. Long-term exposure can cause leukopenia, lower blood pressure, bronchiectasis, etc. Oral LD503.99g/kg. Direct contact with the human body should be avoided. If it splashes on the skin, rinse it quickly with water or boric acid solution, and then apply boric acid ointment. If poisoning is discovered, you should leave the scene immediately, breathe fresh air or be sent to the hospital for treatment.

Storage method

Stored in a cool, ventilated warehouse. Keep away from fire and heat sources. They should be stored separately from oxidants, acids, alkalis, and food chemicals, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials. It should be transported by covered car or train.

2. This product is packed in 0.5kg glass bottles, 5kg polyethylene plastic drums and 200kg iron drums. This product should be stored in a sealed store, and the storage location should be ventilated, moisture-proof, heat-proof, and isolated from acids. It is advisable to use covered cars or trains for transportation, and handle according to “Railway Danger Regulation No. 96009”.

Synthesis method

This product is a co-product of ethylenediamine, diethylenetriamine, triethylenetetramine, and polyethylenepolyamine. For production principles and operations, please refer to ethylenediamine. However, the temperature of the ammonolysis reaction needs to be 160 to 250°C, and the pressure should be above 4.0MPa. Distill the crude polyamine product under reduced pressure, collect the fractions at 160-210°C under a pressure of 1.3kPa, and obtain the finished product of tetraethylpentamine after cooling.

Refining method: Dehydrate with metallic sodium or anhydrous calcium sulfate and then fractionate under reduced pressure. You can also dissolve 150g of tetraethylenepentamine in 300mL of 95% ethanol, and gradually drop in 180mL of concentrated hydrochloric acid while cooling, keeping the temperature below 20°C. Filter out the white precipitate, recrystallize it three times with a mixture of ethanol and water, wash with ether, and dry under vacuum to obtain pure tetraethylenepentamine hydrochloride.

Purpose

1. Used to synthesize polyamide resin, cation exchange resin, lubricating oil additives, fuel oil additives, etc. It can also be used as epoxy resin curing agent, rubber vulcanization accelerator, etc. It is also used in synthetic resins and as additives, curing agents, accelerators, etc. This product is an epoxy resin curing agent with high activity and low viscosity. It is suitable for room temperature curing and rapid curing of epoxy resin products. It can also be used as a vulcanizing agent for fluorine rubber and used in industrial rubber products. It is also used as a lubricant, fuel oil, additive for cyanide-free electroplating, and as a synthetic raw material for polyamide resin and anion exchange resin. In addition, this product also has important uses in the military industry.

2.Used as a room temperature curing agent for epoxy resin, the reference dosage is 14 to 15 parts (mass parts). Curing conditions: room temperature/2d or 100℃/30min. The thermal deformation temperature of the cured product is 95~115℃. It is also used as a solvent for sulfur, resins, dyes and organic synthesis intermediates. Used to make polyamide resins, anion exchange resins and polymerization catalysts. It is also used as rubber vulcanization accelerator, acid gas absorbent, lubricating oil and fuel additive, crude oil demulsifier, saponification agent, hardener, cyanide-free electroplating additive and preparation of insulating coatings, etc.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/91048

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search