Epoxy curing agent Knowledge N,N-Dimethyl-1,2-ethanediamine N,N-Dimethyl-1,2-ethanediamine

N,N-Dimethyl-1,2-ethanediamine N,N-Dimethyl-1,2-ethanediamine

广告位

N,N-dimethyl-1,2-ethylenediamine structural formula

Structural formula

Business number 02W7
Molecular formula C4H12N2
Molecular weight 88.15
label

dimethylethylenediamine

Numbering system

CAS number:108-00-9

MDL number:MFCD00008175

EINECS number:203-541-2

RTECS number:KH8608250

BRN number:605279

PubChem number:24864328

Physical property data

1. Properties: Transparent liquid

2. Relative density: 0.803

3. Relative vapor density (g/mL, air=1): Undetermined

4. Melting point (ºC): Undetermined

5. Boiling point (ºC, normal pressure): 104~106

6. Boiling point (ºC, 12mmHg): Undetermined Confirm

7. Refractive index (D20): 1.4260~1.4300

8. Flash point (ºC): 23

9. Specific rotation (ºC): Not determined

10. Autoignition point or ignition temperature (ºC): Not determined

11. Vapor pressure (mmHg, 25ºC): Undetermined

12. Saturated vapor pressure (kPa, ºC): Undetermined

13. Heat of combustion (KJ/mol): Undetermined

14. Critical temperature (ºC): Undetermined

15. Critical pressure (KPa): Undetermined

16. Oil-water (octanol/water) distribution coefficient Log value: Undetermined

17. Explosion upper limit (%, V/V): Undetermined

18. Explosion lower limit (%, V/V): Undetermined

19. Solubility: Undetermined

Toxicological data

1. Acute toxicity: Rat oral LD5O: 1135mg/kg

Mouse oral LD5O: 1200mg/kg

Rat inhalation LC5O: 2560mg/m3

p>

Ecological data

This substance is slightly hazardous to water.

Molecular structure data

1. Molar refractive index: 27.83

2. Molar volume (cm3/mol): 105.4

3. Isotonic specific volume (90.2K ): 246.0

4. Surface tension (dyne/cm): 29.5

5. Polarizability (10-24cm3): 11.03

Compute chemical data

1. Reference value for hydrophobic parameter calculation (XlogP): -0.7

2. Number of hydrogen bond donors: 1

3. Number of hydrogen bond acceptors: 2

p>

4. Number of rotatable chemical bonds: 2

5. Number of tautomers: none

6. Topological molecule polar surface area 29.3

7. Number of heavy atoms: 6

8. Surface charge: 0

9. Complexity: 26.7

10. Number of isotope atoms: 0

11. Number of determined atomic stereocenters: 0

12. Number of uncertain atomic stereocenters: 0

13. Determine the number of stereocenters of chemical bonds: 0

14. Uncertain number of stereocenters of chemical bonds: 0

15. Number of covalent bond units: 1

Properties and stability

Avoid contact with oxides and acids.

Storage method

Stored in a cool, ventilated warehouse. Keep away from fire, heat and water sources. They should be stored separately from oxidants and acidic substances, and avoid mixed storage. Equipped with the appropriate variety and quantity of fire equipment. The storage area should be equipped with emergency release equipment and suitable containment materials.

Synthesis method

Feeding ratio (mass) 2-chloroethylamine hydrochloride: 40% dimethylamine: caustic soda: filter aid: caustic soda = 1: 3.88: 1.85: 0.22: 0.08.

Add 10% dimethylamine aqueous solution into the glass-lined reactor, cool to 15°C with stirring, and add 2-chloroethylamine hydrochloride in batches within 0.5 to 1 hour, with the temperature not exceeding 20°C. . After the addition is completed, let the reaction solution naturally heat up to 37°C. Then slowly cool it to 30°C, stop cooling, and then let the material liquid continue to naturally heat up to 38°C. Then cool the material liquid to 30°C, and then heat it up to 62°C. The hydrogen chloride released from the tail gas is absorbed by water or alkali. After the reaction mixture was stirred at 62~65°C for 3 hours, it was cooled to 20°C, and caustic soda was added in batches within 0.5~1h. The temperature of the material liquid was controlled at (25±5)°C. After adding the caustic soda, continue stirring at (25±5)°C for 1 hour, then let it stand for layering. Then the organic layer is separated, and the water layer is an emulsion. Diatomaceous earth needs to be added for filtration. The resulting filtrate is clarified and then separated into layers. Then combine the organic layers, add caustic soda, dry, and filter. The filtrate is distilled, unreacted dimethylamine is first recovered, and finally the fraction at 104~106°C is collected, that is, N,N-dimethylethylenediamine. The content is greater than 97%, and the yield is greater than 75%.

Purpose

This product is mainly used for the synthesis of 1-dimethylaminoethyl-5-mercaptotetrazole, the intermediate of Cefotiam.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/92055

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search