Epoxy curing agent Knowledge m-Cresol m-Cresol

m-Cresol m-Cresol

广告位

m-cresol structural formula

Structural formula

Business number 02X1
Molecular formula C7H8O
Molecular weight 108.14
label

3-methylphenol,

m-cresol,

Distilled lignooleic acid,

3-Cresol,

m-Hydroxytoluene,

3-Cresol,

3-Methylphenol,

m-Methylphenol,

3-Hydroxytoluene,

Liquid crystal materials and intermediates

Numbering system

CAS number:108-39-4

MDL number:MFCD00002302

EINECS number:203-577-9

RTECS number:GO6125000

BRN number:506719

PubChem number:24867826

Physical property data

1. Properties: colorless to light yellow transparent liquid with aromatic odor. [1]

2. Melting point (℃): 12[2]

3. Boiling point (℃): 202.8 [3]

4. Relative density (water = 1): 1.03[4]

5. Relative vapor density (Air=1): 3.72[5]

6. Saturated vapor pressure (kPa): 0.13 (72℃)[6]

7. Heat of combustion (kJ/mol): -3680.5[7]

8. Critical temperature (℃): 432[8]

9. Critical pressure (MPa): 4.56[9]

10. Octanol/water partition coefficient: 1.96[ 10]

11. Flash point (℃): 86 (CC) [11]

12. Ignition temperature (℃) :558[12]

13. Explosion upper limit (%): 7.6[13]

14. Explosion lower limit (%) %): 1.1[14]

15. Solubility: Slightly soluble in water, miscible in ethanol, ether, sodium hydroxide aqueous solution, acetone, chloroform, etc. [15]

16. Heat of evaporation (KJ/kg, b.p.): 438.27

17. Heat of fusion (KJ/mol): 9.37

18. Specific heat capacity (KJ/(kg·K), 0~20ºC, constant pressure): 2.01

19. Electrical conductivity (S/m): 1.397×10– 8

20. Solubility (%, 25ºC, water): 2.36

21. Relative density (25℃, 4℃): 1.029

22. Refractive index at room temperature (n25): 1.5384

23. Eccentricity factor: 0.449

24. Solubility parameter (J·cm-3)0.5: 24.080

25. van der Waals area (cm2·mol-1): 8.180×1010

26. van der Waals volume (cm3·mol-1) : 65.030

27. Gas phase standard combustion heat (enthalpy) (kJ·mol-1): -3765.60

28. Gas phase standard claimed heat (enthalpy) )( kJ·mol-1): -132.30

29. Gas phase standard entropy (J·mol-1·K-1 ): 365.15

30. Gas phase standard free energy of formation (kJ·mol-1): -40.1

31. Gas phase standard heat Melting (J·mol-1·K-1): 124.68

32. Liquid phase standard combustion heat (enthalpy) (kJ·mol-1): -3703.89

33. Liquid phase standard claims heat (enthalpy) (kJ·mol-1): -194.01

34.Liquid�It can be separated by distillation. The 4,6-di-tert-butyl m-cresol obtained after separation can be dehydrocarbonized and decomposed into m-cresol and isobutylene by heating to 202°C in the presence of a catalyst. The m-cresol content of the obtained product can reach more than 98%. The recovery rate is about 95%. The recovery rate of isobutylene is above 95% and can be recycled. This method can be used to separate m-cresol and co-produce 2,6-di-tert-butyl p-cresol antioxidant.

Purpose

1. Mainly used as pesticide intermediates to produce the pesticides fenitrothion, fenthion, permethrin, and permethrin. It is also an intermediate for color films, resins, plasticizers and spices. Used as a disinfectant, fumigant and photographic developer.

2. Used as analytical reagents and used in organic synthesis.

3. Used as an intermediate in the synthesis of resins, color films, spices, etc. Pure m-cresol can also be used as a raw material for the organophosphorus pesticides fenitrothion, fenthion and carbamate pesticides mefeniocarb and the pyrethroid permethrin; used in the pharmaceutical industry to prepare pesticides. Ringworm powder tribromocresol; also used in the production of other fine chemicals.

4. Used as analytical reagents and in organic synthesis. [28]

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/92227

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search