Epoxy curing agent Knowledge Hanging white block

Hanging white block

广告位

Structural formula of hanging white block

Structural formula

Business number 03XS
Molecular formula NaH7SCO5
Molecular weight 154.12
label

sodium formaldehyde sulfoxylate,

Hydroxymethanesulfinic acid monosodium salt,

carved white block,

Sodium formaldehyde sulfoxylate hydrate,

dye discharge agent,

reducing agent

Numbering system

CAS number:149-44-0

MDL number:MFCD00150599

EINECS number:205-739-4

RTECS number:PB0380000

BRN number:3630814

PubChem number:24886220

Physical property data

1. Properties: translucent white orthorhombic crystals or small pieces.

2. Density (g/mL, 25/4℃): Uncertain

3. Relative vapor density (g/mL, air=1): Uncertain

4. Melting point (ºC): 64

5. Boiling point (ºC, normal pressure): Uncertain

6. Boiling point (ºC, 5.2kPa): Uncertain

7. Refractive index: Uncertain

8. Flash point (ºC): Uncertain

9. Specific rotation (ºC): Uncertain

10. Autoignition point or ignition temperature (ºC) is uncertain

11. Vapor pressure (kPa, 25ºC): Uncertain

12. Saturated vapor pressure (kPa, 60ºC): Uncertain

13. Heat of combustion (KJ/mol): Uncertain

14. Critical temperature (ºC): Uncertain

15. Critical pressure (KPa): Uncertain

16. Log value of oil-water (octanol/water) partition coefficient: Uncertain

17. Explosion upper limit (%, V /V): Uncertain

18. Lower explosion limit (%, V/V): Uncertain

19. Solubility: Easily soluble in water, slightly soluble in alcohol.

Toxicological data

Acute toxicity: rat oral LD50: >2 gm/kg; rat abdominal LD50: >2 gm/kg; mouse oral LC50: 4 gm/kg.

Ecological data

Other harmful effects: This substance may be harmful to the environment, and special attention should be paid to water bodies.

Molecular structure data

None

Compute chemical data

1. Number of hydrogen bond donors: 1

2. Number of hydrogen bond acceptors: 3

3. Number of rotatable chemical bonds: 1

4. Topological molecular polar surface area (TPSA): 60.4

5. Number of heavy atoms: 6

6. Surface charge: 0

7. Complexity :46.1

8. The number of isotope atoms: 0

9. The number of determined atomic stereocenters: 0

10. The number of uncertain atomic stereocenters: 0

11. Determined number of stereocenters of chemical bonds: 0

12. Uncertain number of stereocenters of chemical bonds: 0

13. Number of covalent bond units: 2

Properties and stability

1. Stable under normal temperature and pressure.

2. Incompatible materials: strong oxidants. Easily soluble in water, slightly soluble in alcohol. It has extremely strong reducing properties under high temperature and can make the dyed color disappear, so it is called white lump. It decomposes when exposed to acid, and decomposes at 120°C to produce toxic gases such as formaldehyde and hydrogen sulfide. Anhydrous suspension white blocks are stable but will gradually decompose in humid air. Aqueous solutions begin to decompose above 60°C, and dilute solutions decompose much faster than concentrated solutions.

3., the aqueous solution is relatively stable below 50℃. It decomposes into sulfite at high temperature. It is easy to oxidize and deliquesce when in contact with air. It dissolves in Water is alkaline, relatively stable in neutral or alkaline solutions, extremely unstable in acidic media, and acts as a reducing agent at high temperatures. This product is more stable than insurance powder.

Storage method

Should be stored in a cool, dry warehouse, and the containers must be sealed to prevent moisture and deterioration.

Synthesis method

In the zinc powder sulfur dioxide formaldehyde method, the slurry made of water and zinc powder reacts with sulfur dioxide gas to generate low zinc sulfite, which is then gradually added to the second reactor pre-filled with formaldehyde solution. Under heating and stirring, the slurry is gradually Add zinc powder and react at 95-105°C to generate a suspension of basic zinc bisulfoxylate formaldehyde, which is sent to the third reactor. The crystals are first washed with water, then left to stand, the clear liquid is extracted, and caustic soda solution is added for reaction to generate the second The suspension of sodium bisulfate formaldehyde and zinc hydroxide is filtered, the filtrate is clarified, concentrated, crystallized and pulverized to obtain the finished sodium bisulfite formaldehyde product.

Purpose

1. In the printing and dyeing industry, it is used as a dye discharge agent and reducing agent to produce indigo dyes, vat dyes, etc.

2. Used in synthetic rubber, sugar production and polymerization of vinyl compounds.

3.Used for resist printing of aniline black and soluble vat dyes. Used in food industry, soap industry, rubber synthesis and sugar as bleaching agent

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/95850

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search