Stannous octoate / CAS:301-10-0 / C16H30O4Sn

Stannous octoate Stannous octoate is a basic catalyst for the production of polyurethane foams, catalysts for room temperature curing silicone rubber, polyurethane rubber, and polyurethane coatings. The chemical properties are extremely unstable and highly susceptible to oxidation. Chinese name stannous octoate English name Stannous octoate Chemical formula C16H30O4Sn Molecular weight 405.10 CAS registration number 301-10-0 Density 1.251 Introduction Chemical Chinese name: stannous octoate Chemical English name: Stannous octoate Formula: C16H30O4Sn Molecular Weight: 405.10 CAS No.: 301-10-0 Density 1.251 Stannous main content: 28+/-0.50% Physical and chemical properties Main ingredients: Content: (in terms of stannous) about 22%, total tin about 23% emulsifiable concentrate. Appearance and traits: white or yellow paste. Relative density (water = 1): 1.251 Flash point (°C): >110 Freezing point: -20 ° C Viscosity (25 ° C): ≤ 380 MPa · s Refractive index: 1.492 Solubility: insoluble in water, soluble in petroleum ether, polyol Corrosive: no corrosion Toxicity: Toxic, with strong neurotoxicity, the maximum allowable concentration in air is 0.1mg/m3. Main use: for organic synthesis. Other physical and chemical properties: 1.4933 use Used as a catalyst for polyurethane synthesis and room temperature vulcanized silicone rubber. It is also used as an epoxy resin catalyst type curing agent. When curing, stannous octoate has a higher catalytic activity than dibutyltin dilaurate. If the two are compounded, the effect is better than that of the single use, and the reaction speed and curing speed can be considered. Since the divalent tin compound is easily oxidized and decomposed by oxygen and water vapor in the air, it is used for nitrogen protection during storage, and must be sealed to avoid high temperature and excessive humidity to prevent activity from deteriorating or failing.