Epoxy curing agent Knowledge Preparation of 3-bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one_Kain Industrial Additive

Preparation of 3-bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one_Kain Industrial Additive

广告位

Background and Overview[1]

3-Bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one is an intermediate in the synthesis of benazepril hydrochloride. Benazepril hydrochloride is a first-line antihypertensive drug recommended by the World Health Organization. It is a chiral drug with good clinical efficacy, high safety and few side effects among the current international angiotensin-converting enzyme inhibitor antihypertensive drugs. .

3-bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one

Preparation[2]

The synthesis methods reported in the literature mainly include: 1. Using a composite catalyst of chromium acetate and 2-methyl-5-ethylpyridine, using air as the oxidant, performing normal pressure continuous liquid phase oxidation, the reaction temperature is 130°C, and tetrahydrogen The molar ratio of naphthalene to oxygen is 1:0.6, and the residence time is 60-70 minutes. The selectivity of generating 1-tetralone is about 90%, and the main by-product is tetralone. The product is subjected to bromination, oximation and rearrangement to obtain 3-bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one 2.γ-benzenebutyric acid cyclization Method: γ-phenylbutyric acid is cyclized under the action of phosphoric acid/phosphoric anhydride, polyphosphoric acid, hydrofluoric acid or concentrated sulfuric acid at 90°C to obtain 1-tetralone. After bromination, oximation and rearrangement, 3-tetralone is obtained. Bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one. 3. γ-Benzenebutyric acid chloride cyclization method: This product is obtained by dehydrochlorination and cyclization in the presence of anhydrous aluminum trichloride or anhydrous tin tetrachloride. After bromination, oximation and rearrangement, 3-bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one is obtained.

The above methods mainly have the following shortcomings: 1. There are many by-products and it is inconvenient to separate the products.

2. The yield is low and the purification is complicated.

3. This route has a low yield and is not suitable for industrial production.

4. There are many reaction steps and complicated operations.

Specific synthesis method:

1) α-tetralone preparation stage

Add γ-butyrolactone, benzene, and anhydrous aluminum chloride into the dry reaction kettle at a molar ratio of 1:10:3. While stirring, slowly raise the temperature to 65°C and keep the reaction for 28 hours; the reaction is completed. After that, it is hydrolyzed by 25 parts by weight of 6% hydrochloric acid solution, separated into layers, and washed with water until neutral; then excess benzene is removed by distillation, and α-tetralone is obtained by high vacuum distillation;

2) Preparation stage of 2-bromo-3,4-dihydro-N-hydroxy-(2H)-naphthalimine

Add α-tetralone and methanol into a dry reaction kettle at a molar ratio of 1:25, and under stirring, drop bromine with a molar ratio of 1.3 at -10°C for bromination reaction; the reaction is completed Add hydroxylamine sulfate with a molar ratio of 1.6, slowly raise the temperature to 38°C, add 7 parts by weight of water to dilute and keep the reaction for 85 hours; centrifuge, wash and dry to obtain 2-bromo-3,4-dihydro-N-hydroxy-( 2H)-naphthalimine;

3) 3-Bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one stage

Add 5.5 parts by weight of heated and melted polyphosphoric acid into a dry reaction kettle, and add the above-mentioned 2-bromo-3,4-dihydro-N-hydroxy-(2H)- in batches under stirring at a temperature of 95°C. Naphthimine, keep warm for 5 hours; add the reaction solution dropwise to 12.5 parts by weight of water while hot for hydrolysis, centrifuge and wash to obtain 3-bromo-1,3,4,5-tetrahydro-2H-1-benzazepine Crude azo-2-one; add 10 parts by weight of methanol and 0.1 parts by weight of activated carbon, heat for decolorization and filtration, then cool the filtrate to -10°C to crystallize for 3 hours, centrifuge, wash and dry to obtain 3-bromo-1,3. 4,5-tetrahydro-2H-1-benzazepine-2-one finished product. After testing, the purity of the finished product 3-bromo-1,3,4,5-tetrahydro-2H-1-benzazepine-2-one is as high as 99.5%, and the yield is as high as 97%.

Main reference materials

[1] Jin Dacheng, Zhang Wei, & Park Fengyu. (2010). 1,3,4,5-tetrahydro-7-alkoxy-2h-1-benzazepine-2-one Synthesis and biological activity. Chemical Bulletin (02), 94-98.

[2] Hai Li, Qian Shan, Wu Yong, & Liu Guangming. (2009). 3-(3-chloropropyl)-1,3,4,5-tetrahydro-7,8-dimethoxy -Improvement of the synthesis process of 2h-3-benzazepine-2-one. West China Journal of Pharmaceutical Sciences (05), 35-36.

[3] Nanyun, Huang Meiyun, Zhang Lingling, & Chen Yingqi. (2013). Synthesis of 3-amino-1,3,4,5-tetrahydro-2h-1-benzazepine-2-one . Synthetic Chemistry(03), 120-122.

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/16201

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search