Epoxy curing agent News Synthesis method of methyltinthiol compound

Synthesis method of methyltinthiol compound

广告位

Synthesis method of methyltinthiol compound

Methyl tin thiol compounds are an important class of organometallic compounds that are used in plastic stabilizers, agricultural chemicals, medicine, and materials science. It is widely used in other fields. Methods for synthesizing such compounds usually involve the reaction of methyltin compounds with thiols, and several common synthetic pathways will be discussed in detail below.

Overview of synthesis methods

The synthesis of methyltin thiol compounds usually follows the following basic steps: first prepare a precursor of methyltin, usually methyltin chloride; then, react this precursor with thiol under appropriate conditions to form The desired methyltin mercaptide compound.

Preparation of methyltin chloride

Methyltin chloride can be produced by reacting tin with methyl chloride at high temperature and pressure. This process usually requires a phase transfer catalyst, such as a quaternary ammonium salt or crown ether, to promote the reaction. The reaction conditions are generally temperature 210-240°C and pressure 1.0-1.3MPa. The generated methyltin chloride mixture also needs to control the content of trimethyltin chloride through a disproportionation reaction to make it less than 0.1%.

Synthesis of methyltin thiol

Direct reaction method

A straightforward synthesis method is to react methyltin chloride directly with thiols. For example, by reacting isooctyl mercaptopropionate with an aqueous solution of methyltin chloride under specific conditions, a mixture of isooctyl monomethyltin trimercaptopropionate and isooctyl dimethyldimethyldimercaptopropionate can be synthesized. Parameters such as reactant ratio, reaction temperature, and pH value are crucial to the purity and yield of the product.

Catalytic reaction method

Another method is to carry out the reaction in the presence of a catalyst, such as adding sodium sulfide and sodium bicarbonate as auxiliary reagents. The methyltin chloride compound intermediate aqueous solution is reacted with isooctyl thioglycolate, sodium sulfide, sodium bicarbonate and a catalyst in a synthesis kettle. After the reaction is completed, the target compound is separated and purified through steps such as layering, water washing, and vacuum distillation.

Synthesis method for controlling pH value

Another method is to control the pH value of the reaction system. For example, first dissolve methyltin chloride in water, then add inorganic alkaline substances to adjust the pH value to 6-8, then add mercaptans, such as isooctyl thioglycolate, and control the reaction temperature to 40-80°C. The time is several hours to prepare the target compound.

Reaction conditions and optimization

In order to obtain the best yield and selectivity, optimization of reaction conditions is crucial. This includes but is not limited to:

  • Reaction temperature: Typically between room temperature and higher temperatures, depending on the starting materials used and the desired products.
  • Reaction time: It ranges from a few hours to dozens of hours, depending on the reaction rate and the control of side reactions.
  • Solvent selection: A suitable solvent can promote the reaction and avoid side reactions.
  • PH control: In some synthetic routes, precise pH control is crucial to the success of the reaction.

Conclusion

The synthesis of methyltinthiol compounds is a complex but controllable process involving a variety of reaction conditions and optimization strategies. By carefully designing experimental conditions, a series of methyltinthiol compounds with specific structures and functions can be effectively synthesized to meet the needs of different fields. With the deepening of research, new synthesis methods and technologies will continue to emerge, bringing more possibilities to the development of this field.

Extended reading:

CAS:2212-32-0 – Manufacturer of N,N-Dicyclohexylmethylamine and N,N-Dimethylcyclohexylamine – Shanghai Ohans Co., LTD

N,N-Dicyclohexylmethylamine – Manufacturer of N,N-Dicyclohexylmethylamine and N,N-Dimethylcyclohexylamine – Shanghai Ohans Co ., LTD

bismuth neodecanoate/CAS 251-964-6 – Amine Catalysts (newtopchem.com)

stannous neodecanoate catalysts – Amine Catalysts (newtopchem.com)

polyurethane tertiary amine catalyst/Dabco 2039 catalyst – Amine Catalysts (newtopchem.com)

DMCHA – morpholine

N-Methylmorpholine – morpholine

Polycat 41 catalyst CAS10294-43-5 Evonik Germany – BDMAEE

Polycat DBU catalyst CAS6674-22-2 Evonik Germany – BDMAEE

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/163287

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search