Epoxy curing agent Knowledge Application of 3-amino-3-(2-nitrophenyl)propionic acid_Kain Industrial Additive

Application of 3-amino-3-(2-nitrophenyl)propionic acid_Kain Industrial Additive

广告位

Background and overview[1]

3-Amino-3-(2-nitrophenyl)propionic acid can be used as a pharmaceutical synthesis intermediate. If 3-amino-3-(2-nitrophenyl)propionic acid is inhaled, move the patient to fresh air; if skin contact occurs, remove contaminated clothing and rinse skin thoroughly with soap and water, if any If you feel discomfort, seek medical attention; if eye contact occurs, separate eyelids, rinse with running water or saline, and seek medical attention immediately; if ingested, rinse mouth immediately, do not induce vomiting, and seek medical attention immediately.

Preparation [1]

The preparation of 3-amino-3-(2-nitrophenyl)propionic acid is as follows:

The specific steps are as follows: stir o-nitrobenzaldehyde (20.4 g, 0.135 mol), formic acid (20.3 mL, 0.539 mol) and malonic acid (18.3 g, 0.176 mol) at 45 °C for half an hour, and then Ammonium formate (21.3 g, 0.338 mol) was added to it, the reaction temperature was raised to 70°C and stirred for one hour, then stirred at 95°C for four hours, then concentrated hydrochloric acid (50 mL) was added and the temperature was maintained for one hour. , cool, add 25mL water, wash twice with ethyl acetate (2X25mL), adjust the pH of the water phase to 4.2 with 50% potassium hydroxide solution, filter the precipitated solid, and dry it under vacuum to obtain 18.33 g of yellow solid, yield 64.6%.

Apply[1]

3-Amino-3-(2-nitrophenyl)propionic acid can be used as a pharmaceutical synthesis intermediate. If the following reaction occurs:

The specific steps are: Dissolve 3-amino-3-(2-nitrophenyl)propionic acid (15 g, 71.4mmol) in 5% sodium hydroxide solution (85 mL) and 85% hydrazine hydrate (5mL) in the mixed solution, the reaction was heated to 80 ° C, and then Raney nickel (2 × 25 mg) was carefully added. After the reaction for half an hour, it was cooled, and the pH was adjusted to 2 with 6W hydrochloric acid. The precipitated solid was filtered and vacuum dried to obtain Yellow solid 6.86 g, yield 54.5%.

Main reference materials

[1] WO2013071880 Nitrogen-containing paracyclic compounds as CRTH2 antagonists

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/18651

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search