author:
malin
Post: 2021年5月12日 54read Comments Off
Overview:Product name: Lupragen N204 polyurethane foaming gel balance catalystAlias: Jeffcat DMP, Lupragen N204, PC CAT DMP, Addocat 117, gel balance catalyst, polyurethane foaming gel balance catalyst, 1,4-dimethylpiperazineProduct description: Lupragen N204 can also be used in pharmaceutical intermediates and other intermediates.Lupragen N204 Polyurethane foaming gel balance catalyst Polyurethane foaming balance catalystPhysical and chemical properties:Lupragen N204 is a colorless to light yellow liquid, soluble in water, and its aqueous solution is weakly alkaline.Relative density: 0.86 (20℃)Flash point (TCC): 22℃Boiling point: 130-133℃Freezing point: -1℃Applications:Lupragen N204 can be used for polyurethane foam/gel balance catalyst, can be used for polyurethane flexible foam, polyurethane rigid foam and coatings, adhesives, etc., which is conducive to foam opening.Lupragen N204 can also be used in other intermediates such as pharmaceutical intermediates.Shelf life:Keep it unopened for two yearsStorage and transportation:Should be sealed and stored in a dry, cool and ventilated warehousepackage:200KG/barrel Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as water resistance. Store in a cool, dry place, keep the container tightly closed, and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, as this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided as much as possible.
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/1870
微信扫一扫打赏
