Epoxy curing agent Knowledge How to use instant lubricant and ground pump lubricant

How to use instant lubricant and ground pump lubricant

广告位

How to use instant lubricant and ground pump lubricant

Pump truck concrete lubricant, also known as concrete pump lubricant, is a new generation used to replace pump mortar - a special material for concrete pump pipes. It has the characteristics of large molecular weight, high purity, fast dissolution speed, no insoluble matter, no rust on steel bars, neutral pH value, and does not change the original strength of concrete. The use of JH-RB molecular moisturizing agent can significantly improve the pumping capacity of concrete, the pump pipe coefficient and resistance, and the service life of the pump pipe. At the same time, it achieves the goals of low-carbon emission reduction, saving money and processes, and shortening operating time.

The recommended source of lubricating agent for sky pumps and ground pumps should not bleed but be easy to flow. Therefore, the pumping agent must have a certain air-entraining effect and the comprehensive flow performance of concrete. Using the Pump Runtong product once can save about 230 yuan in pump mortar and transportation vehicle costs. Calculated based on an annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed mortar. If the pump is opened 2,600 times a year, approximately 2,600 yuan can be saved per year. 600,000 yuan.

Pump truck lubricating agent products are suitable for lubricating pumps on site pump pipes for pumping concrete and various dry mortars. It has good adaptability to various grades of concrete and completely replaces the pump mortar of various pump pipes. Pump Runtong products can avoid pump blockage accidents of concrete pumps and on-site mortar pumps, transport vehicles, increase equipment utilization, and reduce the use costs of enterprises using ready-mixed concrete and ready-mixed dry mortar. The use of pump truck lubricant products saves time, effort and worry. It is a new pumping construction technology. #

The main function of the concrete pump truck lubricant is to clean the pipes before concrete transportation equipment, ground pumps, and truck pumps operate, so as to prevent the concrete pump truck from clogging the pipes when pumping concrete, causing unnecessary economic losses and material waste. The pump is moistened with cement mortar. In addition to the construction cost, it is neither environmentally friendly nor a waste of resources.


</p

广告位
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/20379

author:

Previous article
Next article
Contact Us

Contact us

+86 - 152 2121 6908

Online consultation: QQ交谈

E-mail: info@newtopchem.com

Working hours: Monday to Friday, 9:00-17:30, closed on holidays
Follow wechat
Scan wechat and follow us

Scan wechat and follow us

Follow Weibo
Back to top
Home
Phone
Products
Search