Pump truck lubricant is the abbreviation of concrete pump truck lubricant. Pump truck lubricant is a new product currently appearing on the concrete market. Its main function is to clean the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump. In the past few decades, the ready-mixed concrete industry in various places has been using water and water to moisten pipes. The result is neither economical nor in line with the current concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck lubricant has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.
Lubricant: For ready-mixed concrete, the pump truck and pipes must be moisturized before starting the pump. In the past few decades, the ready-mixed concrete industry in various places has been using water and mortar to moisten pipes, which is costly and wastes materials and vehicles. The developed lubricant has low cost, good effect, saves water, vehicles and energy, and has good promotion prospects.
Precautions for lubricant: 1. There is no residue in the delivery pump tube; 2. The connection of the delivery pump pipe should be sealed without leakage; 3. When pumping concrete, the concrete slump should be 2-3 cm; 4. When using in summer, the temperature of the water pump pipe should be checked first; 5. The pump aid through the pump pipe should not be poured into the concrete structure; 6. Before pumping concrete, you must ensure that there is no water in the pump pipe to avoid diluting the pump aid; 7. If this product accidentally gets into your eyes, rinse immediately with plenty of water.
Use of pump lubricant: First, pour clean dissolved water into the container according to the required amount, then add pump lubricant, stir while adding until all is dissolved, then let it stand for 3-5 minutes, and then Stir and serve. When using a truck pump to pump concrete, pour the prepared Pump Runtong solution into the hopper along the hopper of the pump truck, and then start pouring concrete into the hopper. After the concrete covers the feed port of the delivery pump, pressurization can begin. Pumping concrete and ready-mixed mortars. The same applies when using floor pumps and mortar pumping equipment. Pump truck lubricating agent dosage table Delivery pump tube length Product dosage Dissolved water dosage Below 50 meters 1 bag 30±2 kg 50 meters-100 meters 2 bags 60±5 kg 100-200 meters 3-4 bags 140±10 kg Use Key Points Editor: First ensure that the pump pipes and connecting parts of the truck pump, ground pump, and mortar pump are sealed and have no leakage points; after checking the pump truck pump pipes, flush the pump with clean water to ensure that there are no residues, debris and other blockages in the pump pipes.
</p
微信扫一扫打赏
