Building concrete requires the use of many additives or auxiliary products to improve the strength and performance of the building. Common ones include water reducing agent, pumping agent, and retarder. , early strength agent, accelerating setting agent, waterproofing agent, rust inhibitor, expansion agent and antifreeze agent, etc.
{Brief description of lubricating agent}
Lubricating agent is suitable for pump trucks Lubricating the pipeline can reduce pipeline friction and pipeline resistance so that ready-mixed concrete can be transported, so that the pump will not be blocked. This can also increase the service life of the pump pipe. Please note:
1. There is no residue in the delivery pump pipeline, and the connection should be sealed without leakage;
2. The slump increases 2- 3cm;
3. When used in summer, pump water to reduce the temperature of the pump tube;
4. Before pumping concrete, make sure there is no water in the pump pipe to avoid diluting the pump aid;
5. If it accidentally gets into your eyes, please rinse with plenty of water.
{Advantages of lubricant}
1. It can completely replace pump mortar;
2. Reduce the process and shorten the working time;
3. It can be very good Protect the pump tube and extend the service life;
4. It has the advantages of rust resistance, speed, convenience, environmental protection and cost saving.
The lubricating agent is an additive product that can replace the concrete pumping lubricating mortar without affecting the performance of the concrete. Its formula is composed of polymer materials Yes, a good moisturizing agent product is easily soluble in water, has a rapid dissolution process, and does not contain any impurities. It has no impact on the setting time and strength of concrete, does not cause rust on steel bars, and can form an ideal ion lubrication protective layer, which is beneficial to the pump. Send homework. Author: Zhongke Traceability Detection Technology https://www.bilibili.com/read/cv21836995 Source: bilibili
</p
微信扫一扫打赏
