Concrete pump lubricant is used to replace the pipe cement mortar before pumping concrete. At normal temperature, it can quickly dissolve in water and form a lubricating film composed of numerous micro-anions, thereby fully lubricating the inner tube wall surface of the pump.
Concrete pump lubricating agent is the abbreviation of high-efficiency concrete pump truck pipe agent.
Pump truck pipe agent is a new product appearing in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping to avoid pump clogging. Over the past few decades, water and mortar have been used in the ready-mix concrete industry across the country to wet concrete pumps. The result is neither economical nor in line with the current concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck pipeline additives has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.
The main function is to lubricate the pipeline of the pump truck before pumping to avoid pump clogging. The pump truck pumping agent can significantly improve the concrete pumping capacity, reduce pipeline friction and pipeline resistance, significantly extend the service life of the pump pipe, completely replace the wetting pump mortar, reduce the process, shorten the operation time, and is rust-proof, fast, convenient, Environmental protection, saving money and other advantages.
Mainly to moisten and lubricate pipes; reduce collapse losses of pumped concrete. Since the dry pump pipe will absorb the mortar and moisture in the pumped concrete, especially in high temperature seasons, the collapse of the pumped concrete will decrease rapidly, and eventually the pipeline will be blocked due to the imbalance of the water-cement ratio of the pumped concrete.
Why do "concrete pumps" use lubricants? Solved
One use of Pump Runtong products can save about 230 yuan in pump mortar and transportation vehicle costs. Based on the annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed mortar, if the pump is operated 2,600 times a year, approximately 600,000 yuan can be saved each year.
Precautions for using concrete pump lubricant:
1. There is no residue in the delivery pump pipe.
2. The connection of the pump tube should be sealed and leak-free.
3. When pumping the first truck of concrete, the concrete slump should increase by 2-3 cm.
4. In summer, water should be pumped to lower the temperature of the pump pipe.
5. The pumping agent discharged through the pump pipe should not be poured into the concrete structure.
6. Before pumping concrete, make sure there is no water in the pump pipe to avoid diluting the pump oil.
7. If this product accidentally enters the eyes, rinse immediately with plenty of water. </p
微信扫一扫打赏
