Lubricant hotline 18055268997 truck lubricant, ground pump lubricant, concrete pump truck lubricant, pump lubricant. Excellent quality and performance, it solves the problem of mortar often blocking the pump, saves costs, and improves work efficiency.
Model: JH-RB Specifications: 300g per bag Certification: CCC
Pump truck lubrication Pipe agent is a new product currently appearing in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump. In the past few decades, the ready-mixed concrete industry across the country has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the current concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck lubricant has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.
Application scope
Pump truck lubricant products are suitable for pumping concrete and various Pump lubrication for on-site pump pipes of dry mortar. It has good adaptability to various grades of concrete and completely replaces the pump mortar of various pump pipes. Pump Runtong products can avoid pump clogging accidents of concrete pumps and on-site mortar pumps, reduce transportation vehicles, increase equipment utilization, and reduce the use of ready-mixed concrete and ready-mixed dry mortar users. The use of pump truck lubricant products saves time, effort and worry. It is a new technology for pumping construction.
Product Features
Pump truck lubricant can improve concrete pumping capacity and reduce pipeline Friction and pipeline resistance, greatly extending the service life of pump pipes, completely replacing pump mortar, reducing processes, shortening operation time, and has the advantages of rust prevention, fast, convenient, environmentally friendly, and saving money. Using the Pump Runtong product once can save about 230 yuan in pump mortar and transportation vehicle costs. Calculated based on an annual output of 200,000 cubic meters of concrete and 100,000 cubic meters of ready-mixed mortar. If the pump is opened 2,600 times a year, approximately 2,600 yuan can be saved per year. 600,000 yuan.
How to use
Before concrete pumping construction, take the required amount and dissolve it cleanly Pour the water into the container, then slowly add the pump car lubricant, stir while adding it until it is completely dissolved, then let it sit for 3-5 minutes, stir again and it is ready to use. When using a truck pump to pump concrete, slowly pour the prepared Pump Runtong solution into the hopper along the inner wall of the pump truck hopper, and then start to slowly pour concrete into the hopper. After the concrete covers the feed port of the delivery pump, you can Start pumping concrete and ready-mixed mortar under pressure. The method is the same when using ground pumps and mortar pumping equipment.
Pump truck moisturizing tube dosage preparation table
The long product of the transportation pump tube dissolves water Dosage
Below 50 meters 1 bag 30±2kg
50 meters-100 meters 2 Bags 60±5kg
100-200 meters 3-4 bags 140±10kg
Key points for use
1. First, the pump pipes and connecting parts of the vehicle pump, ground pump, and mortar pump must be sealed without leakage points;
2. After checking the pump pipe of the pump truck, flush the pump with clean water to ensure that there are no residues, debris and other blockages in the pump pipe;
3. When pumping concrete, the lubricant solution from the pump truck should be discharged outside the concrete formwork first, and remember not to pour it into the concrete structure;
4 , after the concrete pump and ready-mixed mortar pump are pumped, the pump pipes and pump trucks should be flushed with clean water in time;
5. Wear protective gear when using this product Glasses. If the product solution is accidentally sprayed into the eyes, rinse immediately with plenty of water. </p
微信扫一扫打赏
