Polyurethane catalyst: PC-12，CAS:7560-83-0， N,N-DicyclohexylmethylamineOverview:Common Name: N,N-DicyclohexylmethylamineOther Chimical Names:N-METHYLDICYCLOHEXYLAMINE;TIMTEC-BBSBB008043;Dicyclohexylamine,N-methyl-;Dicyclohexylmethylamine;n-cycloChemicalbookhexyl-n-methyl-cyclohexanamin;N-Cyclohexyl-N-methylcyclohexanamine;N-cyclohexyl-N-methyl-CyclohexanamineMF： C13H25NMW：195.34CAS： 7560-83-0PC-12，CAS:7560-83-0， N,N-DicyclohexylmethylaminePhysical and Chemical Properties：Physical state (25°C): LiquidForm: ClearColour: ColorlessBoiling point/range: 150°C/2.7kPaFlash Point: 101℃Viscosity: 10 mPa.s@25℃Relative density: 0.89g/cm3@25℃Solubility(ies): Water SolubleFeatures and uses:PC-12 is a low gas TERT amine auxiliary catalyst for improving the skin curing of soft and rigid polyurethane foam.It's as a promoter of foaming catalyst and gel catalyst, adding 20% N- methylcyclohexyl amine into the main catalyst can accelerate the curing and have no influence on other properties.；It's is mainly used in polyurethane rigid building materials, polyurethane rigid spraying foam and polyurethane soft foam.Storage Information：Store in a cool and ventilated warehouse. Keep away from fire and heat source. Keep out of direct sunlight. Keep the container sealed. It should be stored separately from oxidants and edible chemicals, and avoid mixed storage. Fire fighting equipment of corresponding variety and quantity shall be provided. The storage area shall be equipped with leakage emergency treatment equipment and suitable storage materials.Package:180KG/Steel Drum
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/2124
微信扫一扫打赏
