Polyurethane catalyst: PC-37,CAS:1704-62-7,2-[2-(Dimethylamino)ethoxy]ethanol Overview: Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70 MF: C6H15NO2 MW:133.19 CAS: 1704-62-7
Physical and chemical properties: Form: liquid Odour: mild, amine-like Colour: colourless to yellow pH value: 11.5 ( 1.. g/l) Melting point: < -7. °C Boiling point: 2.3.5 °C ( 1,.13 hPa) (other) Vapour pressure: < 1 mbar ( 25 °C) Density: 0.9549 g/cm3 ( 2. °C) (other) Relative density: 0.9549 ( 2. °C) (other) Literature data. Partitioning coefficient n -1.21 (calculated) octanol/water (log Pow): Viscosity, dynamic: 1. mPa.s ( 25 °C) Solubility in water: Molar mass: 133.19 g/mol
Features and uses: PC-37 is colorless or light yellow liquid at room temperature, soluble in water; PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.
Storage Information: Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.
Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70
MF: C6H15NO2
MW:133.19
CAS: 1704-62-7
Physical and chemical properties:
Form:
liquid
Odour:
mild, amine-like
Colour:
colourless to yellow
pH value:
11.5
( 1.. g/l)
Melting point:
No data available
Boiling point:
235 °C
( 1.13 hPa)
Vapour pressure:
< 1 mbar
( 25 °C)
Density:
0.9549 g/cm3
( 20°C)
Relative density:
0.9549
( 20 °C)
Partitioning coefficient n
-1.21
(calculated)
octanol/water (log Pow):
Viscosity, dynamic:
1. mPa.s
( 25 °C)
Solubility in water:
Molar mass:
133.19 g/mol
Features and uses:
PC-37 is colorless or light yellow liquid at room temperature, soluble in water;
PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.
Storage Information:
Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.
This article is from the Internet, does not represent the position of Epoxy curing agent, reproduced please specify the source.https://www.dmp-30.vip/archives/2126