Contents of this article
Why does a concrete pump truck need lubricant?
What is concrete moisturizer?
Can concrete moisturizer be applied inside concrete?
Does c20 fine stone need to be passed through the pump truck first?
What does pipe moistening mortar mean?
Is the lubricant easy to produce?
What kind of chemical raw material is the lubricant? Will it harm the pump truck?
Why does a concrete pump truck need lubricant?
Be careful when using it. It should not have any big impact. Nowadays, moisturizers are being used, so there will definitely be some damage. Clean them in time to minimize the damage.
1. First, ensure that the pump pipes and connecting parts of the truck pump, ground pump, and mortar pump are sealed without leaks;
2. After checking the pump pipes of the pump truck, use clean water Flush the pump so that there are no residues, debris and other blockages in the pump pipe;
3. When pumping concrete, the pump truck lubricant solution should be discharged outside the concrete formwork first, and remember not to pour it into the concrete structure;
4. After the concrete pump and ready-mixed mortar pump are pumped, the pump pipes and pump trucks should be flushed with clean water in time;
5. Protective glasses should be worn when using this product. If the product solution is accidentally sprayed into the eyes, it should be washed immediately with plenty of water
What is a concrete moisturizer?
Pump truck lubricant is the abbreviation of high-efficiency concrete pump truck lubricant. Pump truck lubricant is a new product in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump.
For the past few decades, the ready-mixed concrete industry across the country has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck lubricant has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.
Can concrete moisturizer be applied into concrete?
Cannot be used in concrete
Before pumping, put a certain amount of water into the hopper of the pump truck as required (usually with an eye plate 1/ 2 or more is appropriate), then slowly and evenly add the lubricant product to the water, and stir continuously (you can open the swing valve of the pump truck, so that the swing valve of the pump truck swings back and forth in the bucket more than 3 times) until the product is completely dissolved . Then turn on the positive pump, pump out the solution in the pipe, and at the same time dump the concrete into the hopper and complete the pumping operation. The method is the same when using a ground pump, but attention should be paid to adjusting the amount of RG-H lubricant and dissolved water.
Does c20 fine stone need to be passed through the pump truck first?
When C20 fine stone concrete is pumped by a pump truck, it is still necessary to pass through the pump truck first, that is, the mortar with the same water-cement ratio used for C20 fine stone concrete must first pass through the pump truck pump. It is sent to the working surface, which is what we usually call the moist pipe. Its function is to moisten the pump truck and the concrete pipe to prevent it from being too dry and causing difficulty in pumping concrete
What does pipe moistening mortar mean?
Pipe lubricating mortar means to deliver some mortar before starting to pump concrete to lubricate the delivery pipe.
There are four points to note when using pipe moistening mortar:
1. Pipe moistening mortar is mainly used to moisturize pipes before concrete pumping. It is strictly forbidden to discharge the pipe moistening mortar directly into in the structure.
2. During the transportation of mortar, it cannot be transported in the same vehicle as concrete. There should be on-site supervision by management personnel during use.
3. Improve the management of lubrication mortar and prevent the mixing station from cutting corners and using mortar and concrete together.
4. In order to prevent the above problems from occurring, we recommend using pump truck lubricating agent instead of mortar lubricating agent. Lubricant not only saves costs but is also easy to use
Is lubricant easy to produce?
The moisturizing agent is easy to produce.
Pump truck lubricant is the abbreviation of high-efficiency concrete pump truck lubricant. Pump truck lubricant is a new product in the concrete market. Its main function is to lubricate the pipes of the pump truck before pumping ready-mixed concrete to avoid clogging of the pump.
For the past few decades, the ready-mixed concrete industry across the country has been using water and mortar to lubricate concrete pumps. The result is neither economical nor in line with the concepts of low-carbon environmental protection, energy conservation and emission reduction. The successful development and application of pump truck lubricant has made a positive contribution to the low-carbon, energy-saving and emission reduction of the concrete industry.
What kind of chemical material is the lubricant? Will it harm the pump truck?
What the person above said in this ambiguous way is both harmful and not harmful. Let me tell you, lubricating agent, also known as pumping agent, will not harm the pump truck. Its specific function is to add pumping agent to the water. The pumping agent will turn into a snot-like viscous substance and adhere to the inner wall of the pipe. When pumping concrete, it is Concrete brings out the attached pumping agent</p
微信扫一扫打赏
