1. Product introduction
The lime crystal (plasticizer) produced by our factory is a new type of mortar plasticized building that is developed and compounded by professional technicians by combining the advantages of various mortar admixtures with a variety of chemical materials. Materials, the introduction of this product can significantly save project costs, and it is at the leading level in the domestic construction market.
2. Product performance:
Lime crystal (plasticizer) is a new type of building admixture that completely replaces white ash in mortar. This product has excellent dispersibility and makes cement The utilization rate and strength are fully improved, which can significantly improve the workability, fluidity, cohesion, water retention and adhesion of the mortar, making the mortar air-enabled and plastic, soft and sticky, with a high ash sticking rate, and reducing dust and dust on the ground. The mouth is full, so that the compacted surface of the bricks reaches more than 97%. The mortar does not separate, bleed, or settle. It has air entrainment, water reduction, early strength, antifreeze, sound insulation, heat preservation, impermeability, stability, and reinforcement. Functional, and the plaster on the interior and exterior walls will not fall off, crack, hollow, peel or explode.
3. Scope of application:
This product is widely used in red bricks, hollow bricks, air-entrained blocks, air-entrained concrete, various energy-saving insulation and anti-seepage in industrial, civil and national defense construction projects. Structural masonry and plastering, ceilings, floor tiles, etc.
IV. Product advantages:
Lime crystals (plasticizer) can completely replace white ash when used in mortar, saving 20-30% of water and 10-40% of cement (in mixed mortar) 10-20% in cement mortar and 30-40% in cement mortar). At the same time, it saves space, transportation, loading and unloading, water, electricity, and labor, reduces labor intensity, improves project quality, does not pollute the environment, and greatly saves project costs.
5. How to use:
Use a measuring cup to pour the lime crystals (plasticizer) into the mixer sand and water ash in proportion, stir for 3 minutes and then use. Control the amount of water and place the mixed mortar in a water-retaining place to avoid affecting the workability of the mortar. When plastering an interior wall, smooth the wall and then lightly move it with a trowel to increase the density of the wall. Wait for the wall to gain strength before applying putty powder for better results.
6. Recommended ratio table of masonry plastering mortar
Marking M10 M7.5 M5 M2.5 M13
Cement 32.5 50 50 50 50 50
Fine sand Hezhong sand 250 350 400 600 250
Lime King 0.075 0.1 0.125 0.15 0.2
Dosage 0.15% 0.2% 0.25% 0.3% Special exterior wall plastering cement mortar (specially made)
Proportion 1: 5: 0.0015 1: 7: 0.002 1: 8: 0.0025 1: 12: 0.003
7. Packaging and storage
This product is packed in woven laminated bags, net weight per bag 25kg. Carton packaging is 20kg. This product should be stored in a dry and ventilated place to prevent moisture caking and oil stains. The shelf life is three years.
</p
微信扫一扫打赏
