I. Product introduction
Water slurry is a metal waterproofing agent. It is a milky white slurry liquid. After incorporating cement, it can be generated with water -soluble substances. Hydrophobic repellent film is an admixture that improves the water impermeability of cement mortar and concrete.
2. Scope of application:
This water-proof slurry is mixed with Portland cement of 325# or above to form waterproof mortar or waterproof concrete for use in pools, basements,
roofs, water towers, etc. Waterproof and moisture-proof engineering.
3. How to use:
Pour 5% of the water-proof slurry based on the amount of cement into the bucket first, then add the required clean water, and pour it into the mixer until the total amount is equal to the required water. Stir evenly until the ash ratio is reached. If there are cracks or seepage parts in the base layer, they should be patched and plugged. Before construction, the base layer should be cleared of floating objects, smooth areas should be chopped off, and fully watered to prevent the moisture in the mortar from being absorbed after paving. After cleaning, apply cement slurry and water repellent slurry in a thin and even layer, and apply waterproof mortar while brushing. The thickness of the waterproof mortar plaster layer is generally 20-30mm. The waterproof mortar needs to be covered immediately after setting and watered for 1-2 days. Cement needs to be fresh 325# or higher ordinary Portland cement or slag cement.
4. Packaging and storage:
The water-proof slurry container should be sealed and stored in a cool place, and must not be exposed to the sun. Each barrel is packed in 50kg and 250kg packages. </p
微信扫一扫打赏
