Introduction to foam caulking agent types and their performance and precautions

In the field of adhesives, polyurethane Foam caulk has a high usage rate and has been recognized by many industries. There is no single type of product, and different types of products are suitable for different environments. Users may wish to conduct a detailed analysis and buy a more suitable product.

1, PolyurethaneFoam caulkingHow many types are there?

At present, polyurethanefoam caulkingis divided into two categories: tube type and gun type. Relatively speaking, the gun type has greater pressure and can produce fine and large foam. Tubular products are suitable for environments where the project volume is not large and the foaming effect is not strictly required, and the cost is relatively low.

2、polyurethane Foam caulkIs the performance of stable?

When the material sprayed from the aerosol can encounters air and expands rapidly, foam can be formed. After successful curing, the gaps can be filled and bonded to achieve sealing, sound absorption and heat insulation effects. This is an environmentally friendly and energy-saving product suitable for many industries. When selecting products, you can feel more at ease by cooperating with powerful suppliers. For example, Cosmo is focused on adhesive research and provides customized adhesive application solutions. It has a wide range of uses and can be used in new energy, military industry, medical, aviation, shipbuilding, and electronics. , automobiles, instruments, power supplies, high-speed rail and other industries.

PolyurethaneFoam caulk is very good, at 5-35 degrees It can be used normally in the environment and can withstand -40 to 120degrees of high temperature. It can perform well in this environment and can be used with confidence.

3, Use polyurethaneFoam caulk?

This product is almost harmless to the human body after curing, but before curing it may irritate the eyes and respiratory system, and even cause allergies due to inhalation. For your own safety, it is recommended to wear safety equipment during construction and keep it away from children. In case of contact with eyes, rinse immediately with water.

For polyurethanefoam caulk In general, there is a certain amount of internal pressure to avoid 50 Working at high temperatures above 10 degrees Celsius. After use, garbage should be disposed of in the correct manner to avoid leaving safety hazards.