How to clean foam caulk

PolyurethaneFoam CaulkThere are four cleaning methods, youknow? Many people know that once this product gets on clothes, it can be troublesome to clean. So, we have four good ways to deal with it. Here, we give you a brief introduction. If you are interested, you can take a look.

1、Clean foam caulk with toluene

Toluene andPolyurethane foam is a kind of Organic compounds with the same optical activity. According to the basic principle of similar miscibility, the effect can be achieved. Some people say that using car gasoline is also feasible, and the basic principle is the same. Why not give it a try?

2, use a blade to removeFoam caulk

Polyurethane foam caulkingAfter it is made, use a knife to cut or scrape off the removable part. If it gets on your clothes, put it in the sun for a few days and rub it with your hands after a few days. BubbleGlue will gradually change color and delaminate under strong ultraviolet radiation. Butpolyurethane foam caulking will still leave dirt on your clothes.

3, use cleaning agent to removeFoam caulk

PolyurethaneFor foam caulkingbasic water cleaning methods cannot be cleaned , must be cleaned with special cleaning agents. There will be polyurethane foam in the home building materials market. Caulk‘s cleaner.

4, wash with clean waterFoam caulk

Polyurethane foamHas strong adhesion to skin, clothes and pants, spray Be careful when glueing�Contact with skin and clothing. Work clothes should be worn during construction. If you get it stuck to your clothes, it will be difficult to cleanclean. The clothes and pants are damaged,Once it comes into contact with the skin, rinse immediately with plenty of cold water; if it sprays into the eyes, rinse with cold water and go to the hospital immediately.

After introducing the relevant knowledge points to everyone, everyone should have an understanding. If you need to buy polyurethanefoam caulkYou can contact us directly by phone.