How to clean styrofoam: common methods and unpopular tips

Man makes mistakes and horses stumble. When we use foam glue, we always accidentally get it in places we shouldn’t. What should we do at this time? Today, the editor will talk to you about cleaning styrofoam. There are some common methods and some tips that most people don’t know.

1. How to clean hairspray

1. Clean with plenty of water before solidification

Uncured The foam has strong stickiness to the skin and clothes, so be careful not to touch the skin and clothes when using it. It is best to wear work clothes during construction. If it gets on clothes, it will be difficult to clean and the clothes will be scrapped. Once it comes into contact with the skin, rinse immediately with plenty of water; if it sprays into the eyes, rinse with clean water and go to the hospital quickly.

2. Use the cleaning agent sold exclusively on the market

Conventional washing methods cannot remove it. It must be washed off with a professional cleaning agent. There are cleaning agents specifically designed to clean styrofoam on the building materials market.

3. Try acetone to clean

Acetone is the same as styrofoam, both organic and polar. The same, according to the principle of similar compatibility, the effect can be achieved. Some people say that gasoline is also feasible, and the principle is the same. You might as well try it.

4. Remove with a blade

After the foam glue dries, cut or scrape it with a razor blade Remove what can be removed. If it is stained on clothes, put the clothes in the sun for a few days, then rub it with your hands after a few days. The foaming agent will slowly change color and powder under strong ultraviolet radiation. But foaming agents can still leave stains on clothing.

Two or four methods can be removed:

One trick ：

You can use a high-concentration diluent-banana water for cleaning, but the material cannot be a surface with If you use paint, do you want to brush off the paint color as well? Use a small shovel used for wall painting and cement to scrape off the layer of foam attached to the surface of the glue without worrying about scratches. Then use an oil brush dipped in banana water to brush off the foam on the glue and let it corrode for a while. 1 , After 2 minutes, use the brush to brush in a circular motion, and the glue will fall off. The final cleaning is more troublesome, and you have to wipe it clean with clean water.

Trick 2:

Foam glue stuck to clothes can be cleaned with toothpaste. The foam glue remaining on the door can be washed with boiling water.

Trick three:

Apply the wind oil essence and wait for a while, then wipe it clean. This method will be oily.

Trick Four:

Use a hair dryer to soften the adhesive and weaken its adhesion , it can be easily removed. If there is anotherFor small marks, use nail polish remover to wipe them off.