1. Material characteristics
This product is a high-permeability special resin polymer, specially used to improve existing concrete floors that are not resistant to wear and sand due to poor construction. Gray and other phenomena. During construction, this product can be directly sprayed or rolled on the concrete surface, which can quickly penetrate deep into the concrete surface layer and strongly consolidate aggregate and other components. It is an effective way to compensate for the cement's surface bleeding, freezing damage, expiration (decreased activity), Insufficient use of reinforcing materials leads to serious lack of strength and sanding. It can eliminate the sanding phenomenon before the cement floor is accepted or put into use for a period of time, and greatly improve the wear resistance of the cement surface layer.
2. Main functions
Special resin can greatly improve the surface density, strength, and hardness of the base layer through penetration, penetration, and solidification, improve surface brittleness, increase toughness, and wear resistance. The ability is greatly improved, and the resistance to chemical erosion, weathering, and permeability is enhanced; the surface will not turn yellow or discolored.
3. Construction Methods
. . . . . . 0.2-0.4kg/m2; where the surface is not dense enough, it should be painted twice; keep indoor ventilation after construction. The floor can be used after most of the solvent has evaporated.
IV. Scope of application
1. After sanding is used on new and old cement floors, it can be used as a remedial measure (penetration strengthening, surface reinforcement)
2. Paint the newly built cement floor before use to take preventive measures to prevent the cement floor from sanding;
3. Before painting the floor coating, consolidate the loose base layer to ensure that the coating film adheres to the dense surface. Solid base surface;
4. Use a polishing agent after the completion of the cement hardener wear-resistant floor, or configure a color covering agent to overcome the color difference caused by fading and alkali return of the colored floor;
5. It can be used as penetration enhancer and polishing agent for colored embossed art floors.
V. Packaging and Storage
1. This product is packed in 25kg/barrel and should be placed in a cool place. The sealing condition of the lid should be checked before shipment to prevent leakage.
2. This product contains organic solvents. During storage and construction, attention must be paid to fire prevention. </p
微信扫一扫打赏
