Ordinary putty powder

1. Product introduction:
This product is made of high-quality white cement, heavy calcium, high-quality polymer binder and high-quality additives. It is an ideal high-weather-resistant and environmentally friendly wall putty for exterior wall decoration. .
2. Scope of application: Suitable for smearing and decorating cement mortar on exterior walls of large and small buildings and concrete structure surfaces.

3. Product features:
1. Environmentally friendly and pollution-free, with no formaldehyde smell.
2. It has high strength and is easy to polish, which solves the problem of high strength but difficulty in polishing, and easy polishing but poor strength.
3. Strong adhesion, tightly integrated with the wall, and not easy to separate.
4. It has good water resistance and weather resistance, and can withstand the sun and rain.
5. The seasoning is convenient and even, avoiding proportion errors in the use of ingredients.
6. It is slightly flexible and the surface will not crack easily after completion.
7. The construction performance is good, the scraping and coating are barrier-free, and the construction of complex walls is smooth.

IV. Construction preparation:
1. Remove dust and oil on the wall to make the wall clean and free of floating dust.
2. Remove loose parts of the wall and old paint.
3. Repair cracks on the wall and smooth out any uneven spots.
4. Prepare the electric mixer and mixing bucket.

Stirring:
1. According to the ratio of putty powder: water = 2.5:1, add water to the mixing bucket in the order of adding water first and then adding powder.
2. Use a blender to stir thoroughly into a paste, let it sit for a while, and stir again.

5. Construction technology:
1. Take the stirred paste putty and put it into the mud bucket for scraping construction.
2. The second coat can be scraped in about 5 to 6 hours. The specific interval depends on the weather and temperature.
3. If the decoration project requires it, the third coat can be scraped in the same way.
4. Wait until the putty is completely dry before sanding.
5. Dosage 1.2-1.5 kg/square meter. 6. Precautions:
1. Don’t stir too much material at one time. The prepared putty should be used up within about 3 hours. The remaining dry material cannot be reused with water.
2. This product has moderate strength in the early stage and high strength in the later stage. It takes about 4 weeks to reach the standard strength. If it rains during this period, the time to reach the standard strength will be shortened. Therefore, you need to grasp the time and weather changes when polishing.
7. Packaging: 25kg/barrel.

</p