Thin floor repair agent

1. Product introduction:

This product is a polymer-modified mortar with waterproof and anti-corrosion functions. It can be used for both repair and new construction. It is widely used in concrete underground pipelines, sluices, bridges, etc. Surface repair and protection of concrete projects such as large cooling towers and sewage treatment.

II. Product features:

1. The thin-layer floor repair agent is composed of two components: polymer emulsion and inorganic powder. After curing, the polymer is dispersed in the continuous phase of cement. The high-density mortar formed:

2. It has water retention, a certain elasticity after curing, and has good adhesion to various base layers;

3. Good Impermeability, crack resistance, impact resistance, and wear resistance;

4. Good waterproofing, aging resistance, acid and alkali resistance;

5. Easy to use , can be constructed on wet base, healthy and environmentally friendly;

6. Effectively prevent corrosion of steel bars and deicing salt, freeze-thaw damage;

7. Anti-corrosion function with low chloride ion diffusion rate ;

8. The base layer should be cleaned, and the repair thickness should be greater than 1cm after interface treatment;

3. Scope of application

1. Repair honeycombs and loopholes in concrete , cracks, damaged protective layers, leaking reinforcements and other defects;

2. Repair of concrete structures in factory buildings corroded by corrosive gases;

3. Wear resistance of floor slabs and pavement wear and peeling areas Repair;

4. Packaging and storage:

This product should be moisture-proof and sun-proof. The powder is 25kg/bag and the liquid is 6kg/barrel. The shelf life is three months.

</p